Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta

More Options

• Is this a proxy?
• Similar
• Submit Audit
• Compare

// SPDX-License-Identifier: GPL-3.0-or-later
pragma solidity 0.8.19;

import {IAbx} from "./interfaces/IAbx.sol";
import {ERC20} from "@openzeppelin/contracts/token/ERC20/ERC20.sol";
import {ERC20Permit} from "@openzeppelin/contracts/token/ERC20/extensions/ERC20Permit.sol";

/// @title Abx
/// @author aborean.finance
/// @notice The native token in the Aborean Protocol ecosystem
/// @dev Emitted by the Minter
contract Abx is IAbx, ERC20Permit {
    address public minter;
    address private owner;

    constructor() ERC20("Aborean", "ABX") ERC20Permit("Aborean") {
        minter = msg.sender;
        owner = msg.sender;
    }

    /// @dev No checks as its meant to be once off to set minting rights to BaseV1 Minter
    function setMinter(address _minter) external {
        if (msg.sender != minter) revert NotMinter();
        minter = _minter;
    }

    function mint(address account, uint256 amount) external returns (bool) {
        if (msg.sender != minter) revert NotMinter();
        _mint(account, amount);
        return true;
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import {IERC20} from "@openzeppelin/contracts/token/ERC20/IERC20.sol";

interface IAbx is IERC20 {
    error NotMinter();
    error NotOwner();

    /// @notice Mint an amount of tokens to an account
    ///         Only callable by Minter.sol
    /// @return True if success
    function mint(address account, uint256 amount) external returns (bool);

    /// @notice Address of Minter.sol
    function minter() external view returns (address);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.4) (token/ERC20/extensions/ERC20Permit.sol)

pragma solidity ^0.8.0;

import "./IERC20Permit.sol";
import "../ERC20.sol";
import "../../../utils/cryptography/ECDSA.sol";
import "../../../utils/cryptography/EIP712.sol";
import "../../../utils/Counters.sol";

/**
 * @dev Implementation of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on `{IERC20-approve}`, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 *
 * _Available since v3.4._
 */
abstract contract ERC20Permit is ERC20, IERC20Permit, EIP712 {
    using Counters for Counters.Counter;

    mapping(address => Counters.Counter) private _nonces;

    // solhint-disable-next-line var-name-mixedcase
    bytes32 private constant _PERMIT_TYPEHASH =
        keccak256("Permit(address owner,address spender,uint256 value,uint256 nonce,uint256 deadline)");
    /**
     * @dev In previous versions `_PERMIT_TYPEHASH` was declared as `immutable`.
     * However, to ensure consistency with the upgradeable transpiler, we will continue
     * to reserve a slot.
     * @custom:oz-renamed-from _PERMIT_TYPEHASH
     */
    // solhint-disable-next-line var-name-mixedcase
    bytes32 private _PERMIT_TYPEHASH_DEPRECATED_SLOT;

    /**
     * @dev Initializes the {EIP712} domain separator using the `name` parameter, and setting `version` to `"1"`.
     *
     * It's a good idea to use the same `name` that is defined as the ERC20 token name.
     */
    constructor(string memory name) EIP712(name, "1") {}

    /**
     * @inheritdoc IERC20Permit
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) public virtual override {
        require(block.timestamp <= deadline, "ERC20Permit: expired deadline");

        bytes32 structHash = keccak256(abi.encode(_PERMIT_TYPEHASH, owner, spender, value, _useNonce(owner), deadline));

        bytes32 hash = _hashTypedDataV4(structHash);

        address signer = ECDSA.recover(hash, v, r, s);
        require(signer == owner, "ERC20Permit: invalid signature");

        _approve(owner, spender, value);
    }

    /**
     * @inheritdoc IERC20Permit
     */
    function nonces(address owner) public view virtual override returns (uint256) {
        return _nonces[owner].current();
    }

    /**
     * @inheritdoc IERC20Permit
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view override returns (bytes32) {
        return _domainSeparatorV4();
    }

    /**
     * @dev "Consume a nonce": return the current value and increment.
     *
     * _Available since v4.1._
     */
    function _useNonce(address owner) internal virtual returns (uint256 current) {
        Counters.Counter storage nonce = _nonces[owner];
        current = nonce.current();
        nonce.increment();
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/ERC20.sol)

pragma solidity ^0.8.0;

import "./IERC20.sol";
import "./extensions/IERC20Metadata.sol";
import "../../utils/Context.sol";

/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * The default value of {decimals} is 18. To change this, you should override
 * this function so it returns a different value.
 *
 * We have followed general OpenZeppelin Contracts guidelines: functions revert
 * instead returning `false` on failure. This behavior is nonetheless
 * conventional and does not conflict with the expectations of ERC20
 * applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20, IERC20Metadata {
    mapping(address => uint256) private _balances;

    mapping(address => mapping(address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;

    /**
     * @dev Sets the values for {name} and {symbol}.
     *
     * All two of these values are immutable: they can only be set once during
     * construction.
     */
    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual override returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual override returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5.05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the default value returned by this function, unless
     * it's overridden.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual override returns (uint8) {
        return 18;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual override returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address to, uint256 amount) public virtual override returns (bool) {
        address owner = _msgSender();
        _transfer(owner, to, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * NOTE: If `amount` is the maximum `uint256`, the allowance is not updated on
     * `transferFrom`. This is semantically equivalent to an infinite approval.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * NOTE: Does not update the allowance if the current allowance
     * is the maximum `uint256`.
     *
     * Requirements:
     *
     * - `from` and `to` cannot be the zero address.
     * - `from` must have a balance of at least `amount`.
     * - the caller must have allowance for ``from``'s tokens of at least
     * `amount`.
     */
    function transferFrom(address from, address to, uint256 amount) public virtual override returns (bool) {
        address spender = _msgSender();
        _spendAllowance(from, spender, amount);
        _transfer(from, to, amount);
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, allowance(owner, spender) + addedValue);
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        address owner = _msgSender();
        uint256 currentAllowance = allowance(owner, spender);
        require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
        unchecked {
            _approve(owner, spender, currentAllowance - subtractedValue);
        }

        return true;
    }

    /**
     * @dev Moves `amount` of tokens from `from` to `to`.
     *
     * This internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `from` must have a balance of at least `amount`.
     */
    function _transfer(address from, address to, uint256 amount) internal virtual {
        require(from != address(0), "ERC20: transfer from the zero address");
        require(to != address(0), "ERC20: transfer to the zero address");

        _beforeTokenTransfer(from, to, amount);

        uint256 fromBalance = _balances[from];
        require(fromBalance >= amount, "ERC20: transfer amount exceeds balance");
        unchecked {
            _balances[from] = fromBalance - amount;
            // Overflow not possible: the sum of all balances is capped by totalSupply, and the sum is preserved by
            // decrementing then incrementing.
            _balances[to] += amount;
        }

        emit Transfer(from, to, amount);

        _afterTokenTransfer(from, to, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply += amount;
        unchecked {
            // Overflow not possible: balance + amount is at most totalSupply + amount, which is checked above.
            _balances[account] += amount;
        }
        emit Transfer(address(0), account, amount);

        _afterTokenTransfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        uint256 accountBalance = _balances[account];
        require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
        unchecked {
            _balances[account] = accountBalance - amount;
            // Overflow not possible: amount <= accountBalance <= totalSupply.
            _totalSupply -= amount;
        }

        emit Transfer(account, address(0), amount);

        _afterTokenTransfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(address owner, address spender, uint256 amount) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Updates `owner` s allowance for `spender` based on spent `amount`.
     *
     * Does not update the allowance amount in case of infinite allowance.
     * Revert if not enough allowance is available.
     *
     * Might emit an {Approval} event.
     */
    function _spendAllowance(address owner, address spender, uint256 amount) internal virtual {
        uint256 currentAllowance = allowance(owner, spender);
        if (currentAllowance != type(uint256).max) {
            require(currentAllowance >= amount, "ERC20: insufficient allowance");
            unchecked {
                _approve(owner, spender, currentAllowance - amount);
            }
        }
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual {}

    /**
     * @dev Hook that is called after any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * has been transferred to `to`.
     * - when `from` is zero, `amount` tokens have been minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens have been burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _afterTokenTransfer(address from, address to, uint256 amount) internal virtual {}
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 amount) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Counters.sol)

pragma solidity ^0.8.0;

/**
 * @title Counters
 * @author Matt Condon (@shrugs)
 * @dev Provides counters that can only be incremented, decremented or reset. This can be used e.g. to track the number
 * of elements in a mapping, issuing ERC721 ids, or counting request ids.
 *
 * Include with `using Counters for Counters.Counter;`
 */
library Counters {
    struct Counter {
        // This variable should never be directly accessed by users of the library: interactions must be restricted to
        // the library's function. As of Solidity v0.5.2, this cannot be enforced, though there is a proposal to add
        // this feature: see https://github.com/ethereum/solidity/issues/4637
        uint256 _value; // default: 0
    }

    function current(Counter storage counter) internal view returns (uint256) {
        return counter._value;
    }

    function increment(Counter storage counter) internal {
        unchecked {
            counter._value += 1;
        }
    }

    function decrement(Counter storage counter) internal {
        uint256 value = counter._value;
        require(value > 0, "Counter: decrement overflow");
        unchecked {
            counter._value = value - 1;
        }
    }

    function reset(Counter storage counter) internal {
        counter._value = 0;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.4) (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }

    function _contextSuffixLength() internal view virtual returns (uint256) {
        return 0;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/cryptography/EIP712.sol)

pragma solidity ^0.8.8;

import "./ECDSA.sol";
import "../ShortStrings.sol";
import "../../interfaces/IERC5267.sol";

/**
 * @dev https://eips.ethereum.org/EIPS/eip-712[EIP 712] is a standard for hashing and signing of typed structured data.
 *
 * The encoding specified in the EIP is very generic, and such a generic implementation in Solidity is not feasible,
 * thus this contract does not implement the encoding itself. Protocols need to implement the type-specific encoding
 * they need in their contracts using a combination of `abi.encode` and `keccak256`.
 *
 * This contract implements the EIP 712 domain separator ({_domainSeparatorV4}) that is used as part of the encoding
 * scheme, and the final step of the encoding to obtain the message digest that is then signed via ECDSA
 * ({_hashTypedDataV4}).
 *
 * The implementation of the domain separator was designed to be as efficient as possible while still properly updating
 * the chain id to protect against replay attacks on an eventual fork of the chain.
 *
 * NOTE: This contract implements the version of the encoding known as "v4", as implemented by the JSON RPC method
 * https://docs.metamask.io/guide/signing-data.html[`eth_signTypedDataV4` in MetaMask].
 *
 * NOTE: In the upgradeable version of this contract, the cached values will correspond to the address, and the domain
 * separator of the implementation contract. This will cause the `_domainSeparatorV4` function to always rebuild the
 * separator from the immutable values, which is cheaper than accessing a cached version in cold storage.
 *
 * _Available since v3.4._
 *
 * @custom:oz-upgrades-unsafe-allow state-variable-immutable state-variable-assignment
 */
abstract contract EIP712 is IERC5267 {
    using ShortStrings for *;

    bytes32 private constant _TYPE_HASH =
        keccak256("EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)");

    // Cache the domain separator as an immutable value, but also store the chain id that it corresponds to, in order to
    // invalidate the cached domain separator if the chain id changes.
    bytes32 private immutable _cachedDomainSeparator;
    uint256 private immutable _cachedChainId;
    address private immutable _cachedThis;

    bytes32 private immutable _hashedName;
    bytes32 private immutable _hashedVersion;

    ShortString private immutable _name;
    ShortString private immutable _version;
    string private _nameFallback;
    string private _versionFallback;

    /**
     * @dev Initializes the domain separator and parameter caches.
     *
     * The meaning of `name` and `version` is specified in
     * https://eips.ethereum.org/EIPS/eip-712#definition-of-domainseparator[EIP 712]:
     *
     * - `name`: the user readable name of the signing domain, i.e. the name of the DApp or the protocol.
     * - `version`: the current major version of the signing domain.
     *
     * NOTE: These parameters cannot be changed except through a xref:learn::upgrading-smart-contracts.adoc[smart
     * contract upgrade].
     */
    constructor(string memory name, string memory version) {
        _name = name.toShortStringWithFallback(_nameFallback);
        _version = version.toShortStringWithFallback(_versionFallback);
        _hashedName = keccak256(bytes(name));
        _hashedVersion = keccak256(bytes(version));

        _cachedChainId = block.chainid;
        _cachedDomainSeparator = _buildDomainSeparator();
        _cachedThis = address(this);
    }

    /**
     * @dev Returns the domain separator for the current chain.
     */
    function _domainSeparatorV4() internal view returns (bytes32) {
        if (address(this) == _cachedThis && block.chainid == _cachedChainId) {
            return _cachedDomainSeparator;
        } else {
            return _buildDomainSeparator();
        }
    }

    function _buildDomainSeparator() private view returns (bytes32) {
        return keccak256(abi.encode(_TYPE_HASH, _hashedName, _hashedVersion, block.chainid, address(this)));
    }

    /**
     * @dev Given an already https://eips.ethereum.org/EIPS/eip-712#definition-of-hashstruct[hashed struct], this
     * function returns the hash of the fully encoded EIP712 message for this domain.
     *
     * This hash can be used together with {ECDSA-recover} to obtain the signer of a message. For example:
     *
     * ```solidity
     * bytes32 digest = _hashTypedDataV4(keccak256(abi.encode(
     *     keccak256("Mail(address to,string contents)"),
     *     mailTo,
     *     keccak256(bytes(mailContents))
     * )));
     * address signer = ECDSA.recover(digest, signature);
     * ```
     */
    function _hashTypedDataV4(bytes32 structHash) internal view virtual returns (bytes32) {
        return ECDSA.toTypedDataHash(_domainSeparatorV4(), structHash);
    }

    /**
     * @dev See {EIP-5267}.
     *
     * _Available since v4.9._
     */
    function eip712Domain()
        public
        view
        virtual
        override
        returns (
            bytes1 fields,
            string memory name,
            string memory version,
            uint256 chainId,
            address verifyingContract,
            bytes32 salt,
            uint256[] memory extensions
        )
    {
        return (
            hex"0f", // 01111
            _name.toStringWithFallback(_nameFallback),
            _version.toStringWithFallback(_versionFallback),
            block.chainid,
            address(this),
            bytes32(0),
            new uint256[](0)
        );
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/cryptography/ECDSA.sol)

pragma solidity ^0.8.0;

import "../Strings.sol";

/**
 * @dev Elliptic Curve Digital Signature Algorithm (ECDSA) operations.
 *
 * These functions can be used to verify that a message was signed by the holder
 * of the private keys of a given address.
 */
library ECDSA {
    enum RecoverError {
        NoError,
        InvalidSignature,
        InvalidSignatureLength,
        InvalidSignatureS,
        InvalidSignatureV // Deprecated in v4.8
    }

    function _throwError(RecoverError error) private pure {
        if (error == RecoverError.NoError) {
            return; // no error: do nothing
        } else if (error == RecoverError.InvalidSignature) {
            revert("ECDSA: invalid signature");
        } else if (error == RecoverError.InvalidSignatureLength) {
            revert("ECDSA: invalid signature length");
        } else if (error == RecoverError.InvalidSignatureS) {
            revert("ECDSA: invalid signature 's' value");
        }
    }

    /**
     * @dev Returns the address that signed a hashed message (`hash`) with
     * `signature` or error string. This address can then be used for verification purposes.
     *
     * The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
     * this function rejects them by requiring the `s` value to be in the lower
     * half order, and the `v` value to be either 27 or 28.
     *
     * IMPORTANT: `hash` _must_ be the result of a hash operation for the
     * verification to be secure: it is possible to craft signatures that
     * recover to arbitrary addresses for non-hashed data. A safe way to ensure
     * this is by receiving a hash of the original message (which may otherwise
     * be too long), and then calling {toEthSignedMessageHash} on it.
     *
     * Documentation for signature generation:
     * - with https://web3js.readthedocs.io/en/v1.3.4/web3-eth-accounts.html#sign[Web3.js]
     * - with https://docs.ethers.io/v5/api/signer/#Signer-signMessage[ethers]
     *
     * _Available since v4.3._
     */
    function tryRecover(bytes32 hash, bytes memory signature) internal pure returns (address, RecoverError) {
        if (signature.length == 65) {
            bytes32 r;
            bytes32 s;
            uint8 v;
            // ecrecover takes the signature parameters, and the only way to get them
            // currently is to use assembly.
            /// @solidity memory-safe-assembly
            assembly {
                r := mload(add(signature, 0x20))
                s := mload(add(signature, 0x40))
                v := byte(0, mload(add(signature, 0x60)))
            }
            return tryRecover(hash, v, r, s);
        } else {
            return (address(0), RecoverError.InvalidSignatureLength);
        }
    }

    /**
     * @dev Returns the address that signed a hashed message (`hash`) with
     * `signature`. This address can then be used for verification purposes.
     *
     * The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
     * this function rejects them by requiring the `s` value to be in the lower
     * half order, and the `v` value to be either 27 or 28.
     *
     * IMPORTANT: `hash` _must_ be the result of a hash operation for the
     * verification to be secure: it is possible to craft signatures that
     * recover to arbitrary addresses for non-hashed data. A safe way to ensure
     * this is by receiving a hash of the original message (which may otherwise
     * be too long), and then calling {toEthSignedMessageHash} on it.
     */
    function recover(bytes32 hash, bytes memory signature) internal pure returns (address) {
        (address recovered, RecoverError error) = tryRecover(hash, signature);
        _throwError(error);
        return recovered;
    }

    /**
     * @dev Overload of {ECDSA-tryRecover} that receives the `r` and `vs` short-signature fields separately.
     *
     * See https://eips.ethereum.org/EIPS/eip-2098[EIP-2098 short signatures]
     *
     * _Available since v4.3._
     */
    function tryRecover(bytes32 hash, bytes32 r, bytes32 vs) internal pure returns (address, RecoverError) {
        bytes32 s = vs & bytes32(0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff);
        uint8 v = uint8((uint256(vs) >> 255) + 27);
        return tryRecover(hash, v, r, s);
    }

    /**
     * @dev Overload of {ECDSA-recover} that receives the `r and `vs` short-signature fields separately.
     *
     * _Available since v4.2._
     */
    function recover(bytes32 hash, bytes32 r, bytes32 vs) internal pure returns (address) {
        (address recovered, RecoverError error) = tryRecover(hash, r, vs);
        _throwError(error);
        return recovered;
    }

    /**
     * @dev Overload of {ECDSA-tryRecover} that receives the `v`,
     * `r` and `s` signature fields separately.
     *
     * _Available since v4.3._
     */
    function tryRecover(bytes32 hash, uint8 v, bytes32 r, bytes32 s) internal pure returns (address, RecoverError) {
        // EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature
        // unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines
        // the valid range for s in (301): 0 < s < secp256k1n ÷ 2 + 1, and for v in (302): v ∈ {27, 28}. Most
        // signatures from current libraries generate a unique signature with an s-value in the lower half order.
        //
        // If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value
        // with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or
        // vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept
        // these malleable signatures as well.
        if (uint256(s) > 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0) {
            return (address(0), RecoverError.InvalidSignatureS);
        }

        // If the signature is valid (and not malleable), return the signer address
        address signer = ecrecover(hash, v, r, s);
        if (signer == address(0)) {
            return (address(0), RecoverError.InvalidSignature);
        }

        return (signer, RecoverError.NoError);
    }

    /**
     * @dev Overload of {ECDSA-recover} that receives the `v`,
     * `r` and `s` signature fields separately.
     */
    function recover(bytes32 hash, uint8 v, bytes32 r, bytes32 s) internal pure returns (address) {
        (address recovered, RecoverError error) = tryRecover(hash, v, r, s);
        _throwError(error);
        return recovered;
    }

    /**
     * @dev Returns an Ethereum Signed Message, created from a `hash`. This
     * produces hash corresponding to the one signed with the
     * https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]
     * JSON-RPC method as part of EIP-191.
     *
     * See {recover}.
     */
    function toEthSignedMessageHash(bytes32 hash) internal pure returns (bytes32 message) {
        // 32 is the length in bytes of hash,
        // enforced by the type signature above
        /// @solidity memory-safe-assembly
        assembly {
            mstore(0x00, "\x19Ethereum Signed Message:\n32")
            mstore(0x1c, hash)
            message := keccak256(0x00, 0x3c)
        }
    }

    /**
     * @dev Returns an Ethereum Signed Message, created from `s`. This
     * produces hash corresponding to the one signed with the
     * https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]
     * JSON-RPC method as part of EIP-191.
     *
     * See {recover}.
     */
    function toEthSignedMessageHash(bytes memory s) internal pure returns (bytes32) {
        return keccak256(abi.encodePacked("\x19Ethereum Signed Message:\n", Strings.toString(s.length), s));
    }

    /**
     * @dev Returns an Ethereum Signed Typed Data, created from a
     * `domainSeparator` and a `structHash`. This produces hash corresponding
     * to the one signed with the
     * https://eips.ethereum.org/EIPS/eip-712[`eth_signTypedData`]
     * JSON-RPC method as part of EIP-712.
     *
     * See {recover}.
     */
    function toTypedDataHash(bytes32 domainSeparator, bytes32 structHash) internal pure returns (bytes32 data) {
        /// @solidity memory-safe-assembly
        assembly {
            let ptr := mload(0x40)
            mstore(ptr, "\x19\x01")
            mstore(add(ptr, 0x02), domainSeparator)
            mstore(add(ptr, 0x22), structHash)
            data := keccak256(ptr, 0x42)
        }
    }

    /**
     * @dev Returns an Ethereum Signed Data with intended validator, created from a
     * `validator` and `data` according to the version 0 of EIP-191.
     *
     * See {recover}.
     */
    function toDataWithIntendedValidatorHash(address validator, bytes memory data) internal pure returns (bytes32) {
        return keccak256(abi.encodePacked("\x19\x00", validator, data));
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.4) (token/ERC20/extensions/IERC20Permit.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 *
 * ==== Security Considerations
 *
 * There are two important considerations concerning the use of `permit`. The first is that a valid permit signature
 * expresses an allowance, and it should not be assumed to convey additional meaning. In particular, it should not be
 * considered as an intention to spend the allowance in any specific way. The second is that because permits have
 * built-in replay protection and can be submitted by anyone, they can be frontrun. A protocol that uses permits should
 * take this into consideration and allow a `permit` call to fail. Combining these two aspects, a pattern that may be
 * generally recommended is:
 *
 * ```solidity
 * function doThingWithPermit(..., uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s) public {
 *     try token.permit(msg.sender, address(this), value, deadline, v, r, s) {} catch {}
 *     doThing(..., value);
 * }
 *
 * function doThing(..., uint256 value) public {
 *     token.safeTransferFrom(msg.sender, address(this), value);
 *     ...
 * }
 * ```
 *
 * Observe that: 1) `msg.sender` is used as the owner, leaving no ambiguity as to the signer intent, and 2) the use of
 * `try/catch` allows the permit to fail and makes the code tolerant to frontrunning. (See also
 * {SafeERC20-safeTransferFrom}).
 *
 * Additionally, note that smart contract wallets (such as Argent or Safe) are not able to produce permit signatures, so
 * contracts should have entry points that don't rely on permit.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     *
     * CAUTION: See Security Considerations above.
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);

    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol)

pragma solidity ^0.8.0;

import "../IERC20.sol";

/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 *
 * _Available since v4.1._
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/ShortStrings.sol)

pragma solidity ^0.8.8;

import "./StorageSlot.sol";

// | string  | 0xAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA   |
// | length  | 0x                                                              BB |
type ShortString is bytes32;

/**
 * @dev This library provides functions to convert short memory strings
 * into a `ShortString` type that can be used as an immutable variable.
 *
 * Strings of arbitrary length can be optimized using this library if
 * they are short enough (up to 31 bytes) by packing them with their
 * length (1 byte) in a single EVM word (32 bytes). Additionally, a
 * fallback mechanism can be used for every other case.
 *
 * Usage example:
 *
 * ```solidity
 * contract Named {
 *     using ShortStrings for *;
 *
 *     ShortString private immutable _name;
 *     string private _nameFallback;
 *
 *     constructor(string memory contractName) {
 *         _name = contractName.toShortStringWithFallback(_nameFallback);
 *     }
 *
 *     function name() external view returns (string memory) {
 *         return _name.toStringWithFallback(_nameFallback);
 *     }
 * }
 * ```
 */
library ShortStrings {
    // Used as an identifier for strings longer than 31 bytes.
    bytes32 private constant _FALLBACK_SENTINEL = 0x00000000000000000000000000000000000000000000000000000000000000FF;

    error StringTooLong(string str);
    error InvalidShortString();

    /**
     * @dev Encode a string of at most 31 chars into a `ShortString`.
     *
     * This will trigger a `StringTooLong` error is the input string is too long.
     */
    function toShortString(string memory str) internal pure returns (ShortString) {
        bytes memory bstr = bytes(str);
        if (bstr.length > 31) {
            revert StringTooLong(str);
        }
        return ShortString.wrap(bytes32(uint256(bytes32(bstr)) | bstr.length));
    }

    /**
     * @dev Decode a `ShortString` back to a "normal" string.
     */
    function toString(ShortString sstr) internal pure returns (string memory) {
        uint256 len = byteLength(sstr);
        // using `new string(len)` would work locally but is not memory safe.
        string memory str = new string(32);
        /// @solidity memory-safe-assembly
        assembly {
            mstore(str, len)
            mstore(add(str, 0x20), sstr)
        }
        return str;
    }

    /**
     * @dev Return the length of a `ShortString`.
     */
    function byteLength(ShortString sstr) internal pure returns (uint256) {
        uint256 result = uint256(ShortString.unwrap(sstr)) & 0xFF;
        if (result > 31) {
            revert InvalidShortString();
        }
        return result;
    }

    /**
     * @dev Encode a string into a `ShortString`, or write it to storage if it is too long.
     */
    function toShortStringWithFallback(string memory value, string storage store) internal returns (ShortString) {
        if (bytes(value).length < 32) {
            return toShortString(value);
        } else {
            StorageSlot.getStringSlot(store).value = value;
            return ShortString.wrap(_FALLBACK_SENTINEL);
        }
    }

    /**
     * @dev Decode a string that was encoded to `ShortString` or written to storage using {setWithFallback}.
     */
    function toStringWithFallback(ShortString value, string storage store) internal pure returns (string memory) {
        if (ShortString.unwrap(value) != _FALLBACK_SENTINEL) {
            return toString(value);
        } else {
            return store;
        }
    }

    /**
     * @dev Return the length of a string that was encoded to `ShortString` or written to storage using {setWithFallback}.
     *
     * WARNING: This will return the "byte length" of the string. This may not reflect the actual length in terms of
     * actual characters as the UTF-8 encoding of a single character can span over multiple bytes.
     */
    function byteLengthWithFallback(ShortString value, string storage store) internal view returns (uint256) {
        if (ShortString.unwrap(value) != _FALLBACK_SENTINEL) {
            return byteLength(value);
        } else {
            return bytes(store).length;
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (interfaces/IERC5267.sol)

pragma solidity ^0.8.0;

interface IERC5267 {
    /**
     * @dev MAY be emitted to signal that the domain could have changed.
     */
    event EIP712DomainChanged();

    /**
     * @dev returns the fields and values that describe the domain separator used by this contract for EIP-712
     * signature.
     */
    function eip712Domain()
        external
        view
        returns (
            bytes1 fields,
            string memory name,
            string memory version,
            uint256 chainId,
            address verifyingContract,
            bytes32 salt,
            uint256[] memory extensions
        );
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/Strings.sol)

pragma solidity ^0.8.0;

import "./math/Math.sol";
import "./math/SignedMath.sol";

/**
 * @dev String operations.
 */
library Strings {
    bytes16 private constant _SYMBOLS = "0123456789abcdef";
    uint8 private constant _ADDRESS_LENGTH = 20;

    /**
     * @dev Converts a `uint256` to its ASCII `string` decimal representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        unchecked {
            uint256 length = Math.log10(value) + 1;
            string memory buffer = new string(length);
            uint256 ptr;
            /// @solidity memory-safe-assembly
            assembly {
                ptr := add(buffer, add(32, length))
            }
            while (true) {
                ptr--;
                /// @solidity memory-safe-assembly
                assembly {
                    mstore8(ptr, byte(mod(value, 10), _SYMBOLS))
                }
                value /= 10;
                if (value == 0) break;
            }
            return buffer;
        }
    }

    /**
     * @dev Converts a `int256` to its ASCII `string` decimal representation.
     */
    function toString(int256 value) internal pure returns (string memory) {
        return string(abi.encodePacked(value < 0 ? "-" : "", toString(SignedMath.abs(value))));
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
     */
    function toHexString(uint256 value) internal pure returns (string memory) {
        unchecked {
            return toHexString(value, Math.log256(value) + 1);
        }
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
     */
    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
        bytes memory buffer = new bytes(2 * length + 2);
        buffer[0] = "0";
        buffer[1] = "x";
        for (uint256 i = 2 * length + 1; i > 1; --i) {
            buffer[i] = _SYMBOLS[value & 0xf];
            value >>= 4;
        }
        require(value == 0, "Strings: hex length insufficient");
        return string(buffer);
    }

    /**
     * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal representation.
     */
    function toHexString(address addr) internal pure returns (string memory) {
        return toHexString(uint256(uint160(addr)), _ADDRESS_LENGTH);
    }

    /**
     * @dev Returns true if the two strings are equal.
     */
    function equal(string memory a, string memory b) internal pure returns (bool) {
        return keccak256(bytes(a)) == keccak256(bytes(b));
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/StorageSlot.sol)
// This file was procedurally generated from scripts/generate/templates/StorageSlot.js.

pragma solidity ^0.8.0;

/**
 * @dev Library for reading and writing primitive types to specific storage slots.
 *
 * Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.
 * This library helps with reading and writing to such slots without the need for inline assembly.
 *
 * The functions in this library return Slot structs that contain a `value` member that can be used to read or write.
 *
 * Example usage to set ERC1967 implementation slot:
 * ```solidity
 * contract ERC1967 {
 *     bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
 *
 *     function _getImplementation() internal view returns (address) {
 *         return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
 *     }
 *
 *     function _setImplementation(address newImplementation) internal {
 *         require(Address.isContract(newImplementation), "ERC1967: new implementation is not a contract");
 *         StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
 *     }
 * }
 * ```
 *
 * _Available since v4.1 for `address`, `bool`, `bytes32`, `uint256`._
 * _Available since v4.9 for `string`, `bytes`._
 */
library StorageSlot {
    struct AddressSlot {
        address value;
    }

    struct BooleanSlot {
        bool value;
    }

    struct Bytes32Slot {
        bytes32 value;
    }

    struct Uint256Slot {
        uint256 value;
    }

    struct StringSlot {
        string value;
    }

    struct BytesSlot {
        bytes value;
    }

    /**
     * @dev Returns an `AddressSlot` with member `value` located at `slot`.
     */
    function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `BooleanSlot` with member `value` located at `slot`.
     */
    function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `Bytes32Slot` with member `value` located at `slot`.
     */
    function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `Uint256Slot` with member `value` located at `slot`.
     */
    function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `StringSlot` with member `value` located at `slot`.
     */
    function getStringSlot(bytes32 slot) internal pure returns (StringSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `StringSlot` representation of the string storage pointer `store`.
     */
    function getStringSlot(string storage store) internal pure returns (StringSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := store.slot
        }
    }

    /**
     * @dev Returns an `BytesSlot` with member `value` located at `slot`.
     */
    function getBytesSlot(bytes32 slot) internal pure returns (BytesSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `BytesSlot` representation of the bytes storage pointer `store`.
     */
    function getBytesSlot(bytes storage store) internal pure returns (BytesSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := store.slot
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/math/Math.sol)

pragma solidity ^0.8.0;

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    enum Rounding {
        Down, // Toward negative infinity
        Up, // Toward infinity
        Zero // Toward zero
    }

    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow.
        return (a & b) + (a ^ b) / 2;
    }

    /**
     * @dev Returns the ceiling of the division of two numbers.
     *
     * This differs from standard division with `/` in that it rounds up instead
     * of rounding down.
     */
    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b - 1) / b can overflow on addition, so we distribute.
        return a == 0 ? 0 : (a - 1) / b + 1;
    }

    /**
     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or denominator == 0
     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv)
     * with further edits by Uniswap Labs also under MIT license.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator) internal pure returns (uint256 result) {
        unchecked {
            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
            // variables such that product = prod1 * 2^256 + prod0.
            uint256 prod0; // Least significant 256 bits of the product
            uint256 prod1; // Most significant 256 bits of the product
            assembly {
                let mm := mulmod(x, y, not(0))
                prod0 := mul(x, y)
                prod1 := sub(sub(mm, prod0), lt(mm, prod0))
            }

            // Handle non-overflow cases, 256 by 256 division.
            if (prod1 == 0) {
                // Solidity will revert if denominator == 0, unlike the div opcode on its own.
                // The surrounding unchecked block does not change this fact.
                // See https://docs.soliditylang.org/en/latest/control-structures.html#checked-or-unchecked-arithmetic.
                return prod0 / denominator;
            }

            // Make sure the result is less than 2^256. Also prevents denominator == 0.
            require(denominator > prod1, "Math: mulDiv overflow");

            ///////////////////////////////////////////////
            // 512 by 256 division.
            ///////////////////////////////////////////////

            // Make division exact by subtracting the remainder from [prod1 prod0].
            uint256 remainder;
            assembly {
                // Compute remainder using mulmod.
                remainder := mulmod(x, y, denominator)

                // Subtract 256 bit number from 512 bit number.
                prod1 := sub(prod1, gt(remainder, prod0))
                prod0 := sub(prod0, remainder)
            }

            // Factor powers of two out of denominator and compute largest power of two divisor of denominator. Always >= 1.
            // See https://cs.stackexchange.com/q/138556/92363.

            // Does not overflow because the denominator cannot be zero at this stage in the function.
            uint256 twos = denominator & (~denominator + 1);
            assembly {
                // Divide denominator by twos.
                denominator := div(denominator, twos)

                // Divide [prod1 prod0] by twos.
                prod0 := div(prod0, twos)

                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
                twos := add(div(sub(0, twos), twos), 1)
            }

            // Shift in bits from prod1 into prod0.
            prod0 |= prod1 * twos;

            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
            // four bits. That is, denominator * inv = 1 mod 2^4.
            uint256 inverse = (3 * denominator) ^ 2;

            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also works
            // in modular arithmetic, doubling the correct bits in each step.
            inverse *= 2 - denominator * inverse; // inverse mod 2^8
            inverse *= 2 - denominator * inverse; // inverse mod 2^16
            inverse *= 2 - denominator * inverse; // inverse mod 2^32
            inverse *= 2 - denominator * inverse; // inverse mod 2^64
            inverse *= 2 - denominator * inverse; // inverse mod 2^128
            inverse *= 2 - denominator * inverse; // inverse mod 2^256

            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
            // is no longer required.
            result = prod0 * inverse;
            return result;
        }
    }

    /**
     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internal pure returns (uint256) {
        uint256 result = mulDiv(x, y, denominator);
        if (rounding == Rounding.Up && mulmod(x, y, denominator) > 0) {
            result += 1;
        }
        return result;
    }

    /**
     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded down.
     *
     * Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
     */
    function sqrt(uint256 a) internal pure returns (uint256) {
        if (a == 0) {
            return 0;
        }

        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
        //
        // We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
        // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.
        //
        // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`
        // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`
        // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`
        //
        // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.
        uint256 result = 1 << (log2(a) >> 1);

        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
        // into the expected uint128 result.
        unchecked {
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            return min(result, a / result);
        }
    }

    /**
     * @notice Calculates sqrt(a), following the selected rounding direction.
     */
    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = sqrt(a);
            return result + (rounding == Rounding.Up && result * result < a ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 2, rounded down, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 128;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 64;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 32;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 16;
            }
            if (value >> 8 > 0) {
                value >>= 8;
                result += 8;
            }
            if (value >> 4 > 0) {
                value >>= 4;
                result += 4;
            }
            if (value >> 2 > 0) {
                value >>= 2;
                result += 2;
            }
            if (value >> 1 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log2(value);
            return result + (rounding == Rounding.Up && 1 << result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 10, rounded down, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >= 10 ** 64) {
                value /= 10 ** 64;
                result += 64;
            }
            if (value >= 10 ** 32) {
                value /= 10 ** 32;
                result += 32;
            }
            if (value >= 10 ** 16) {
                value /= 10 ** 16;
                result += 16;
            }
            if (value >= 10 ** 8) {
                value /= 10 ** 8;
                result += 8;
            }
            if (value >= 10 ** 4) {
                value /= 10 ** 4;
                result += 4;
            }
            if (value >= 10 ** 2) {
                value /= 10 ** 2;
                result += 2;
            }
            if (value >= 10 ** 1) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log10(value);
            return result + (rounding == Rounding.Up && 10 ** result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 256, rounded down, of a positive value.
     * Returns 0 if given 0.
     *
     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
     */
    function log256(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 16;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 8;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 4;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 2;
            }
            if (value >> 8 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 256, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log256(value);
            return result + (rounding == Rounding.Up && 1 << (result << 3) < value ? 1 : 0);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/math/SignedMath.sol)

pragma solidity ^0.8.0;

/**
 * @dev Standard signed math utilities missing in the Solidity language.
 */
library SignedMath {
    /**
     * @dev Returns the largest of two signed numbers.
     */
    function max(int256 a, int256 b) internal pure returns (int256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two signed numbers.
     */
    function min(int256 a, int256 b) internal pure returns (int256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two signed numbers without overflow.
     * The result is rounded towards zero.
     */
    function average(int256 a, int256 b) internal pure returns (int256) {
        // Formula from the book "Hacker's Delight"
        int256 x = (a & b) + ((a ^ b) >> 1);
        return x + (int256(uint256(x) >> 255) & (a ^ b));
    }

    /**
     * @dev Returns the absolute unsigned value of a signed value.
     */
    function abs(int256 n) internal pure returns (uint256) {
        unchecked {
            // must be unchecked in order to support `n = type(int256).min`
            return uint256(n >= 0 ? n : -n);
        }
    }
}

{
  "optimizer": {
    "enabled": true,
    "mode": "3",
    "runs": 200
  },
  "outputSelection": {
    "*": {
      "*": [
        "abi"
      ]
    }
  },
  "detectMissingLibraries": false,
  "forceEVMLA": false,
  "enableEraVMExtensions": false,
  "codegen": "yul",
  "libraries": {
    "contracts/art/PerlinNoise.sol": {
      "PerlinNoise": "0x25B11E6e5b2d1A7309A98274b459d4d0081c85Ef"
    },
    "contracts/art/Trig.sol": {
      "Trig": "0x00b2Ed8c1c84B02614B3579fF830b9aDbd52f273"
    },
    "contracts/libraries/BalanceLogicLibrary.sol": {
      "BalanceLogicLibrary": "0x58025B26C518ac345bA1476B050BAb9f4A20B35d"
    },
    "contracts/libraries/DelegationLogicLibrary.sol": {
      "DelegationLogicLibrary": "0x2A7Db0012bfE811a79b6888800D6E1aDc0d8c10C"
    }
  }
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[],"name":"InvalidShortString","type":"error"},{"inputs":[],"name":"NotMinter","type":"error"},{"inputs":[],"name":"NotOwner","type":"error"},{"inputs":[{"internalType":"string","name":"str","type":"string"}],"name":"StringTooLong","type":"error"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"spender","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Approval","type":"event"},{"anonymous":false,"inputs":[],"name":"EIP712DomainChanged","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Transfer","type":"event"},{"inputs":[],"name":"DOMAIN_SEPARATOR","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"spender","type":"address"}],"name":"allowance","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"approve","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"balanceOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"decimals","outputs":[{"internalType":"uint8","name":"","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"subtractedValue","type":"uint256"}],"name":"decreaseAllowance","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"eip712Domain","outputs":[{"internalType":"bytes1","name":"fields","type":"bytes1"},{"internalType":"string","name":"name","type":"string"},{"internalType":"string","name":"version","type":"string"},{"internalType":"uint256","name":"chainId","type":"uint256"},{"internalType":"address","name":"verifyingContract","type":"address"},{"internalType":"bytes32","name":"salt","type":"bytes32"},{"internalType":"uint256[]","name":"extensions","type":"uint256[]"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"addedValue","type":"uint256"}],"name":"increaseAllowance","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"mint","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"minter","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"name","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"}],"name":"nonces","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"},{"internalType":"uint256","name":"deadline","type":"uint256"},{"internalType":"uint8","name":"v","type":"uint8"},{"internalType":"bytes32","name":"r","type":"bytes32"},{"internalType":"bytes32","name":"s","type":"bytes32"}],"name":"permit","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_minter","type":"address"}],"name":"setMinter","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"symbol","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalSupply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transfer","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transferFrom","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"}]

9c4d535b00000000000000000000000000000000000000000000000000000000000000000100025d954126e1c62995275b9d56f652e874b6604472eecf116e12f4fb927d00000000000000000000000000000000000000000000000000000000000000600000000000000000000000000000000000000000000000000000000000000000

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