Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta

More Options

• Is this a proxy?
• Similar
• Submit Audit
• Compare

// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.8.0;

/// @author thirdweb
/// @author Modified from Matter Labs - Paymaster Examples (https://github.com/matter-labs/paymaster-examples/blob/main/contracts/contracts/paymasters/SignatureBasedPaymaster.sol)

//   $$\     $$\       $$\                 $$\                         $$\
//   $$ |    $$ |      \__|                $$ |                        $$ |
// $$$$$$\   $$$$$$$\  $$\  $$$$$$\   $$$$$$$ |$$\  $$\  $$\  $$$$$$\  $$$$$$$\
// \_$$  _|  $$  __$$\ $$ |$$  __$$\ $$  __$$ |$$ | $$ | $$ |$$  __$$\ $$  __$$\
//   $$ |    $$ |  $$ |$$ |$$ |  \__|$$ /  $$ |$$ | $$ | $$ |$$$$$$$$ |$$ |  $$ |
//   $$ |$$\ $$ |  $$ |$$ |$$ |      $$ |  $$ |$$ | $$ | $$ |$$   ____|$$ |  $$ |
//   \$$$$  |$$ |  $$ |$$ |$$ |      \$$$$$$$ |\$$$$$\$$$$  |\$$$$$$$\ $$$$$$$  |
//    \____/ \__|  \__|\__|\__|       \_______| \_____\____/  \_______|\_______/

//  ==========  External imports    ==========

import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/utils/cryptography/ECDSA.sol";
import "@openzeppelin/contracts/access/Ownable.sol";
import {EIP712} from "@openzeppelin/contracts/utils/cryptography/EIP712.sol";

import {IPaymaster, ExecutionResult, PAYMASTER_VALIDATION_SUCCESS_MAGIC} from "@matterlabs/zksync-contracts/l2/system-contracts/interfaces/IPaymaster.sol";
import {IPaymasterFlow} from "@matterlabs/zksync-contracts/l2/system-contracts/interfaces/IPaymasterFlow.sol";
import {TransactionHelper, Transaction} from "@matterlabs/zksync-contracts/l2/system-contracts/libraries/TransactionHelper.sol";

import "@matterlabs/zksync-contracts/l2/system-contracts/Constants.sol";

/// @notice This smart contract pays the gas fees on behalf of users that provide valid signature from the signer.
/// @dev This contract is controlled by an owner, who can update the signer, cancel a user's nonce and withdraw funds from contract.
contract SignatureBasedPaymaster is IPaymaster, Ownable, EIP712 {
    using ECDSA for bytes32;

    // Note - EIP712 Domain compliance typehash. TYPES should exactly match while signing signature to avoid signature failure.
    bytes32 public constant SIGNATURE_TYPEHASH = keccak256(
    "SignatureBasedPaymaster(address userAddress,uint256 lastTimestamp,uint256 nonces)"
    );

    // All signatures should be validated based on signer
    address public signer;

    // Mapping user => nonce to guard against signature re-play attack.
    mapping(address => uint256) public nonces;

    modifier onlyBootloader() {
        require(
            msg.sender == BOOTLOADER_FORMAL_ADDRESS,
            "Only bootloader can call this method"
        );
        // Continue execution if called from the bootloader.
        _;
    }

    /// @param _signer Sets the signer to validate against signatures
    /// @param _admin Sets the owner of the contract
    /// @dev Changes in EIP712 constructor arguments - "name","version" would update domainSeparator which should be taken into considertion while signing.
    constructor(address _signer, address _admin) EIP712("SignatureBasedPaymaster","1") {
        require(_signer != address(0), "Signer cannot be address(0)");
        // Owner can be signer too.
        signer = _signer;
        _transferOwnership(_admin);
    }

    function validateAndPayForPaymasterTransaction(
        bytes32,
        bytes32,
        Transaction calldata _transaction
    )
        external
        payable
        onlyBootloader
        returns (bytes4 magic, bytes memory context)
    {
        // By default we consider the transaction as accepted.
        magic = PAYMASTER_VALIDATION_SUCCESS_MAGIC;
        require(
            _transaction.paymasterInput.length >= 4,
            "The standard paymaster input must be at least 4 bytes long"
        );

        bytes4 paymasterInputSelector = bytes4(
            _transaction.paymasterInput[0:4]
        );
        if (paymasterInputSelector == IPaymasterFlow.general.selector) {
            // Note - We first need to decode innerInputs data to bytes.
            (bytes memory innerInputs) = abi.decode(
                _transaction.paymasterInput[4:],
                (bytes)
            );
            // Note - Decode the innerInputs as per encoding. Here, we have encoded lastTimestamp and signature in innerInputs
            (uint lastTimestamp, bytes memory sig) = abi.decode(innerInputs,(uint256,bytes));

            // Verify signature expiry based on timestamp.
            // lastTimestamp is used in signature hash, hence cannot be faked.
            require(block.timestamp <= lastTimestamp, "Paymaster: Signature expired");
            // Get user address from transaction.from
            address userAddress = address(uint160(_transaction.from));
            // Generate hash
            bytes32 hash = keccak256(abi.encode(SIGNATURE_TYPEHASH, userAddress,lastTimestamp, nonces[userAddress]++));
            // EIP712._hashTypedDataV4 hashes with domain separator that includes chain id. Hence prevention to signature replay atttacks.
            bytes32 digest = _hashTypedDataV4(hash);
            // Revert if signer not matched with recovered address. Reverts on address(0) as well.
            require(signer == digest.recover(sig),"Paymaster: Invalid signer");


            // Note, that while the minimal amount of ETH needed is tx.gasPrice * tx.gasLimit,
            // neither paymaster nor account are allowed to access this context variable.
            uint256 requiredETH = _transaction.gasLimit *
                _transaction.maxFeePerGas;

            // The bootloader never returns any data, so it can safely be ignored here.
            (bool success, ) = payable(BOOTLOADER_FORMAL_ADDRESS).call{
                value: requiredETH
            }("");
            require(
                success,
                "Failed to transfer tx fee to the bootloader. Paymaster balance might not be enough."
            );
        } else {
            revert("Unsupported paymaster flow");
        }
    }

    function postTransaction(
        bytes calldata _context,
        Transaction calldata _transaction,
        bytes32,
        bytes32,
        ExecutionResult _txResult,
        uint256 _maxRefundedGas
    ) external payable override onlyBootloader {
        // Refunds are not supported yet.
    }
    function withdraw(address _to) external onlyOwner {
        // send paymaster funds to the owner
        (bool success, ) = payable(_to).call{value: address(this).balance}("");
        require(success, "Failed to withdraw funds from paymaster.");

    }
    receive() external payable {}

    /// @dev Only owner should be able to change signer.
    /// @param _signer New signer address
    function changeSigner(address _signer) onlyOwner public {
        signer = _signer;
    }
    /// @dev Only owner should be able to update user nonce.
    /// @dev There could be a scenario where owner needs to cancel paying gas for a certain user transaction.
    /// @param _userAddress user address to update the nonce.
    function cancelNonce(address _userAddress) onlyOwner public {
        nonces[_userAddress]++;
    }

    function domainSeparator() public view returns(bytes32) {
        return _domainSeparatorV4();
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "./interfaces/IBootloaderUtilities.sol";
import "./libraries/TransactionHelper.sol";
import "./libraries/RLPEncoder.sol";
import "./libraries/EfficientCall.sol";

/**
 * @author Matter Labs
 * @notice A contract that provides some utility methods for the bootloader
 * that is very hard to write in Yul.
 */
contract BootloaderUtilities is IBootloaderUtilities {
    using TransactionHelper for *;

    /// @notice Calculates the canonical transaction hash and the recommended transaction hash.
    /// @param _transaction The transaction.
    /// @return txHash and signedTxHash of the transaction, i.e. the transaction hash to be used in the explorer and commits to all
    /// the fields of the transaction and the recommended hash to be signed for this transaction.
    /// @dev txHash must be unique for all transactions.
    function getTransactionHashes(
        Transaction calldata _transaction
    ) external view override returns (bytes32 txHash, bytes32 signedTxHash) {
        signedTxHash = _transaction.encodeHash();
        if (_transaction.txType == EIP_712_TX_TYPE) {
            txHash = keccak256(bytes.concat(signedTxHash, EfficientCall.keccak(_transaction.signature)));
        } else if (_transaction.txType == LEGACY_TX_TYPE) {
            txHash = encodeLegacyTransactionHash(_transaction);
        } else if (_transaction.txType == EIP_1559_TX_TYPE) {
            txHash = encodeEIP1559TransactionHash(_transaction);
        } else if (_transaction.txType == EIP_2930_TX_TYPE) {
            txHash = encodeEIP2930TransactionHash(_transaction);
        } else {
            revert("Unsupported tx type");
        }
    }

    /// @notice Calculates the hash for a legacy transaction.
    /// @param _transaction The legacy transaction.
    /// @return txHash The hash of the transaction.
    function encodeLegacyTransactionHash(Transaction calldata _transaction) internal view returns (bytes32 txHash) {
        // Hash of legacy transactions are encoded as one of the:
        // - RLP(nonce, gasPrice, gasLimit, to, value, data, chainId, 0, 0)
        // - RLP(nonce, gasPrice, gasLimit, to, value, data)
        //
        // In this RLP encoding, only the first one above list appears, so we encode each element
        // inside list and then concatenate the length of all elements with them.

        bytes memory encodedNonce = RLPEncoder.encodeUint256(_transaction.nonce);
        // Encode `gasPrice` and `gasLimit` together to prevent "stack too deep error".
        bytes memory encodedGasParam;
        {
            bytes memory encodedGasPrice = RLPEncoder.encodeUint256(_transaction.maxFeePerGas);
            bytes memory encodedGasLimit = RLPEncoder.encodeUint256(_transaction.gasLimit);
            encodedGasParam = bytes.concat(encodedGasPrice, encodedGasLimit);
        }

        bytes memory encodedTo = RLPEncoder.encodeAddress(address(uint160(_transaction.to)));
        bytes memory encodedValue = RLPEncoder.encodeUint256(_transaction.value);
        // Encode only the length of the transaction data, and not the data itself,
        // so as not to copy to memory a potentially huge transaction data twice.
        bytes memory encodedDataLength;
        {
            // Safe cast, because the length of the transaction data can't be so large.
            uint64 txDataLen = uint64(_transaction.data.length);
            if (txDataLen != 1) {
                // If the length is not equal to one, then only using the length can it be encoded definitely.
                encodedDataLength = RLPEncoder.encodeNonSingleBytesLen(txDataLen);
            } else if (_transaction.data[0] >= 0x80) {
                // If input is a byte in [0x80, 0xff] range, RLP encoding will concatenates 0x81 with the byte.
                encodedDataLength = hex"81";
            }
            // Otherwise the length is not encoded at all.
        }

        bytes memory rEncoded;
        {
            uint256 rInt = uint256(bytes32(_transaction.signature[0:32]));
            rEncoded = RLPEncoder.encodeUint256(rInt);
        }
        bytes memory sEncoded;
        {
            uint256 sInt = uint256(bytes32(_transaction.signature[32:64]));
            sEncoded = RLPEncoder.encodeUint256(sInt);
        }
        bytes memory vEncoded;
        {
            uint256 vInt = uint256(uint8(_transaction.signature[64]));
            require(vInt == 27 || vInt == 28, "Invalid v value");

            // If the `chainId` is specified in the transaction, then the `v` value is encoded as
            // `35 + y + 2 * chainId == vInt + 8 + 2 * chainId`, where y - parity bit (see EIP-155).
            if (_transaction.reserved[0] != 0) {
                vInt += 8 + block.chainid * 2;
            }

            vEncoded = RLPEncoder.encodeUint256(vInt);
        }

        bytes memory encodedListLength;
        unchecked {
            uint256 listLength = encodedNonce.length +
                encodedGasParam.length +
                encodedTo.length +
                encodedValue.length +
                encodedDataLength.length +
                _transaction.data.length +
                rEncoded.length +
                sEncoded.length +
                vEncoded.length;

            // Safe cast, because the length of the list can't be so large.
            encodedListLength = RLPEncoder.encodeListLen(uint64(listLength));
        }

        return
            keccak256(
                bytes.concat(
                    encodedListLength,
                    encodedNonce,
                    encodedGasParam,
                    encodedTo,
                    encodedValue,
                    encodedDataLength,
                    _transaction.data,
                    vEncoded,
                    rEncoded,
                    sEncoded
                )
            );
    }

    /// @notice Calculates the hash for an EIP2930 transaction.
    /// @param _transaction The EIP2930 transaction.
    /// @return txHash The hash of the transaction.
    function encodeEIP2930TransactionHash(Transaction calldata _transaction) internal view returns (bytes32) {
        // Encode all fixed-length params to avoid "stack too deep error"
        bytes memory encodedFixedLengthParams;
        {
            bytes memory encodedChainId = RLPEncoder.encodeUint256(block.chainid);
            bytes memory encodedNonce = RLPEncoder.encodeUint256(_transaction.nonce);
            bytes memory encodedGasPrice = RLPEncoder.encodeUint256(_transaction.maxFeePerGas);
            bytes memory encodedGasLimit = RLPEncoder.encodeUint256(_transaction.gasLimit);
            bytes memory encodedTo = RLPEncoder.encodeAddress(address(uint160(_transaction.to)));
            bytes memory encodedValue = RLPEncoder.encodeUint256(_transaction.value);
            encodedFixedLengthParams = bytes.concat(
                encodedChainId,
                encodedNonce,
                encodedGasPrice,
                encodedGasLimit,
                encodedTo,
                encodedValue
            );
        }

        // Encode only the length of the transaction data, and not the data itself,
        // so as not to copy to memory a potentially huge transaction data twice.
        bytes memory encodedDataLength;
        {
            // Safe cast, because the length of the transaction data can't be so large.
            uint64 txDataLen = uint64(_transaction.data.length);
            if (txDataLen != 1) {
                // If the length is not equal to one, then only using the length can it be encoded definitely.
                encodedDataLength = RLPEncoder.encodeNonSingleBytesLen(txDataLen);
            } else if (_transaction.data[0] >= 0x80) {
                // If input is a byte in [0x80, 0xff] range, RLP encoding will concatenates 0x81 with the byte.
                encodedDataLength = hex"81";
            }
            // Otherwise the length is not encoded at all.
        }

        // On zkSync, access lists are always zero length (at least for now).
        bytes memory encodedAccessListLength = RLPEncoder.encodeListLen(0);

        bytes memory rEncoded;
        {
            uint256 rInt = uint256(bytes32(_transaction.signature[0:32]));
            rEncoded = RLPEncoder.encodeUint256(rInt);
        }
        bytes memory sEncoded;
        {
            uint256 sInt = uint256(bytes32(_transaction.signature[32:64]));
            sEncoded = RLPEncoder.encodeUint256(sInt);
        }
        bytes memory vEncoded;
        {
            uint256 vInt = uint256(uint8(_transaction.signature[64]));
            require(vInt == 27 || vInt == 28, "Invalid v value");

            vEncoded = RLPEncoder.encodeUint256(vInt - 27);
        }

        bytes memory encodedListLength;
        unchecked {
            uint256 listLength = encodedFixedLengthParams.length +
                encodedDataLength.length +
                _transaction.data.length +
                encodedAccessListLength.length +
                rEncoded.length +
                sEncoded.length +
                vEncoded.length;

            // Safe cast, because the length of the list can't be so large.
            encodedListLength = RLPEncoder.encodeListLen(uint64(listLength));
        }

        return
            keccak256(
                bytes.concat(
                    "\x01",
                    encodedListLength,
                    encodedFixedLengthParams,
                    encodedDataLength,
                    _transaction.data,
                    encodedAccessListLength,
                    vEncoded,
                    rEncoded,
                    sEncoded
                )
            );
    }

    /// @notice Calculates the hash for an EIP1559 transaction.
    /// @param _transaction The legacy transaction.
    /// @return txHash The hash of the transaction.
    function encodeEIP1559TransactionHash(Transaction calldata _transaction) internal view returns (bytes32) {
        // The formula for hash of EIP1559 transaction in the original proposal:
        // https://github.com/ethereum/EIPs/blob/master/EIPS/eip-1559.md

        // Encode all fixed-length params to avoid "stack too deep error"
        bytes memory encodedFixedLengthParams;
        {
            bytes memory encodedChainId = RLPEncoder.encodeUint256(block.chainid);
            bytes memory encodedNonce = RLPEncoder.encodeUint256(_transaction.nonce);
            bytes memory encodedMaxPriorityFeePerGas = RLPEncoder.encodeUint256(_transaction.maxPriorityFeePerGas);
            bytes memory encodedMaxFeePerGas = RLPEncoder.encodeUint256(_transaction.maxFeePerGas);
            bytes memory encodedGasLimit = RLPEncoder.encodeUint256(_transaction.gasLimit);
            bytes memory encodedTo = RLPEncoder.encodeAddress(address(uint160(_transaction.to)));
            bytes memory encodedValue = RLPEncoder.encodeUint256(_transaction.value);
            encodedFixedLengthParams = bytes.concat(
                encodedChainId,
                encodedNonce,
                encodedMaxPriorityFeePerGas,
                encodedMaxFeePerGas,
                encodedGasLimit,
                encodedTo,
                encodedValue
            );
        }

        // Encode only the length of the transaction data, and not the data itself,
        // so as not to copy to memory a potentially huge transaction data twice.
        bytes memory encodedDataLength;
        {
            // Safe cast, because the length of the transaction data can't be so large.
            uint64 txDataLen = uint64(_transaction.data.length);
            if (txDataLen != 1) {
                // If the length is not equal to one, then only using the length can it be encoded definitely.
                encodedDataLength = RLPEncoder.encodeNonSingleBytesLen(txDataLen);
            } else if (_transaction.data[0] >= 0x80) {
                // If input is a byte in [0x80, 0xff] range, RLP encoding will concatenates 0x81 with the byte.
                encodedDataLength = hex"81";
            }
            // Otherwise the length is not encoded at all.
        }

        // On zkSync, access lists are always zero length (at least for now).
        bytes memory encodedAccessListLength = RLPEncoder.encodeListLen(0);

        bytes memory rEncoded;
        {
            uint256 rInt = uint256(bytes32(_transaction.signature[0:32]));
            rEncoded = RLPEncoder.encodeUint256(rInt);
        }
        bytes memory sEncoded;
        {
            uint256 sInt = uint256(bytes32(_transaction.signature[32:64]));
            sEncoded = RLPEncoder.encodeUint256(sInt);
        }
        bytes memory vEncoded;
        {
            uint256 vInt = uint256(uint8(_transaction.signature[64]));
            require(vInt == 27 || vInt == 28, "Invalid v value");

            vEncoded = RLPEncoder.encodeUint256(vInt - 27);
        }

        bytes memory encodedListLength;
        unchecked {
            uint256 listLength = encodedFixedLengthParams.length +
                encodedDataLength.length +
                _transaction.data.length +
                encodedAccessListLength.length +
                rEncoded.length +
                sEncoded.length +
                vEncoded.length;

            // Safe cast, because the length of the list can't be so large.
            encodedListLength = RLPEncoder.encodeListLen(uint64(listLength));
        }

        return
            keccak256(
                bytes.concat(
                    "\x02",
                    encodedListLength,
                    encodedFixedLengthParams,
                    encodedDataLength,
                    _transaction.data,
                    encodedAccessListLength,
                    vEncoded,
                    rEncoded,
                    sEncoded
                )
            );
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "./interfaces/IAccountCodeStorage.sol";
import "./interfaces/INonceHolder.sol";
import "./interfaces/IContractDeployer.sol";
import "./interfaces/IKnownCodesStorage.sol";
import "./interfaces/IImmutableSimulator.sol";
import "./interfaces/IEthToken.sol";
import "./interfaces/IL1Messenger.sol";
import "./interfaces/ISystemContext.sol";
import "./interfaces/IBytecodeCompressor.sol";
import "./BootloaderUtilities.sol";

/// @dev All the system contracts introduced by zkSync have their addresses
/// started from 2^15 in order to avoid collision with Ethereum precompiles.
uint160 constant SYSTEM_CONTRACTS_OFFSET = 0x8000; // 2^15

/// @dev All the system contracts must be located in the kernel space,
/// i.e. their addresses must be below 2^16.
uint160 constant MAX_SYSTEM_CONTRACT_ADDRESS = 0xffff; // 2^16 - 1

address constant ECRECOVER_SYSTEM_CONTRACT = address(0x01);
address constant SHA256_SYSTEM_CONTRACT = address(0x02);

/// @dev The current maximum deployed precompile address.
/// Note: currently only two precompiles are deployed:
/// 0x01 - ecrecover
/// 0x02 - sha256
/// Important! So the constant should be updated if more precompiles are deployed.
uint256 constant CURRENT_MAX_PRECOMPILE_ADDRESS = uint256(uint160(SHA256_SYSTEM_CONTRACT));

address payable constant BOOTLOADER_FORMAL_ADDRESS = payable(address(SYSTEM_CONTRACTS_OFFSET + 0x01));
IAccountCodeStorage constant ACCOUNT_CODE_STORAGE_SYSTEM_CONTRACT = IAccountCodeStorage(
    address(SYSTEM_CONTRACTS_OFFSET + 0x02)
);
INonceHolder constant NONCE_HOLDER_SYSTEM_CONTRACT = INonceHolder(address(SYSTEM_CONTRACTS_OFFSET + 0x03));
IKnownCodesStorage constant KNOWN_CODE_STORAGE_CONTRACT = IKnownCodesStorage(address(SYSTEM_CONTRACTS_OFFSET + 0x04));
IImmutableSimulator constant IMMUTABLE_SIMULATOR_SYSTEM_CONTRACT = IImmutableSimulator(
    address(SYSTEM_CONTRACTS_OFFSET + 0x05)
);
IContractDeployer constant DEPLOYER_SYSTEM_CONTRACT = IContractDeployer(address(SYSTEM_CONTRACTS_OFFSET + 0x06));

// A contract that is allowed to deploy any codehash
// on any address. To be used only during an upgrade.
address constant FORCE_DEPLOYER = address(SYSTEM_CONTRACTS_OFFSET + 0x07);
IL1Messenger constant L1_MESSENGER_CONTRACT = IL1Messenger(address(SYSTEM_CONTRACTS_OFFSET + 0x08));
address constant MSG_VALUE_SYSTEM_CONTRACT = address(SYSTEM_CONTRACTS_OFFSET + 0x09);

IEthToken constant ETH_TOKEN_SYSTEM_CONTRACT = IEthToken(address(SYSTEM_CONTRACTS_OFFSET + 0x0a));

address constant KECCAK256_SYSTEM_CONTRACT = address(SYSTEM_CONTRACTS_OFFSET + 0x10);

ISystemContext constant SYSTEM_CONTEXT_CONTRACT = ISystemContext(payable(address(SYSTEM_CONTRACTS_OFFSET + 0x0b)));

BootloaderUtilities constant BOOTLOADER_UTILITIES = BootloaderUtilities(address(SYSTEM_CONTRACTS_OFFSET + 0x0c));

address constant EVENT_WRITER_CONTRACT = address(SYSTEM_CONTRACTS_OFFSET + 0x0d);

IBytecodeCompressor constant BYTECODE_COMPRESSOR_CONTRACT = IBytecodeCompressor(
    address(SYSTEM_CONTRACTS_OFFSET + 0x0e)
);

/// @dev If the bitwise AND of the extraAbi[2] param when calling the MSG_VALUE_SIMULATOR
/// is non-zero, the call will be assumed to be a system one.
uint256 constant MSG_VALUE_SIMULATOR_IS_SYSTEM_BIT = 1;

/// @dev The maximal msg.value that context can have
uint256 constant MAX_MSG_VALUE = 2 ** 128 - 1;

/// @dev Prefix used during derivation of account addresses using CREATE2
/// @dev keccak256("zksyncCreate2")
bytes32 constant CREATE2_PREFIX = 0x2020dba91b30cc0006188af794c2fb30dd8520db7e2c088b7fc7c103c00ca494;
/// @dev Prefix used during derivation of account addresses using CREATE
/// @dev keccak256("zksyncCreate")
bytes32 constant CREATE_PREFIX = 0x63bae3a9951d38e8a3fbb7b70909afc1200610fc5bc55ade242f815974674f23;

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

interface IAccountCodeStorage {
    function storeAccountConstructingCodeHash(address _address, bytes32 _hash) external;

    function storeAccountConstructedCodeHash(address _address, bytes32 _hash) external;

    function markAccountCodeHashAsConstructed(address _address) external;

    function getRawCodeHash(address _address) external view returns (bytes32 codeHash);

    function getCodeHash(uint256 _input) external view returns (bytes32 codeHash);

    function getCodeSize(uint256 _input) external view returns (uint256 codeSize);
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "../libraries/TransactionHelper.sol";

interface IBootloaderUtilities {
    function getTransactionHashes(
        Transaction calldata _transaction
    ) external view returns (bytes32 txHash, bytes32 signedTxHash);
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

interface IBytecodeCompressor {
    function publishCompressedBytecode(
        bytes calldata _bytecode,
        bytes calldata _rawCompressedData
    ) external payable returns (bytes32 bytecodeHash);
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

interface IContractDeployer {
    /// @notice Defines the version of the account abstraction protocol
    /// that a contract claims to follow.
    /// - `None` means that the account is just a contract and it should never be interacted
    /// with as a custom account
    /// - `Version1` means that the account follows the first version of the account abstraction protocol
    enum AccountAbstractionVersion {
        None,
        Version1
    }

    /// @notice Defines the nonce ordering used by the account
    /// - `Sequential` means that it is expected that the nonces are monotonic and increment by 1
    /// at a time (the same as EOAs).
    /// - `Arbitrary` means that the nonces for the accounts can be arbitrary. The operator
    /// should serve the transactions from such an account on a first-come-first-serve basis.
    /// @dev This ordering is more of a suggestion to the operator on how the AA expects its transactions
    /// to be processed and is not considered as a system invariant.
    enum AccountNonceOrdering {
        Sequential,
        Arbitrary
    }

    struct AccountInfo {
        AccountAbstractionVersion supportedAAVersion;
        AccountNonceOrdering nonceOrdering;
    }

    event ContractDeployed(
        address indexed deployerAddress,
        bytes32 indexed bytecodeHash,
        address indexed contractAddress
    );

    event AccountNonceOrderingUpdated(address indexed accountAddress, AccountNonceOrdering nonceOrdering);

    event AccountVersionUpdated(address indexed accountAddress, AccountAbstractionVersion aaVersion);

    function getNewAddressCreate2(
        address _sender,
        bytes32 _bytecodeHash,
        bytes32 _salt,
        bytes calldata _input
    ) external view returns (address newAddress);

    function getNewAddressCreate(address _sender, uint256 _senderNonce) external pure returns (address newAddress);

    function create2(
        bytes32 _salt,
        bytes32 _bytecodeHash,
        bytes calldata _input
    ) external payable returns (address newAddress);

    function create2Account(
        bytes32 _salt,
        bytes32 _bytecodeHash,
        bytes calldata _input,
        AccountAbstractionVersion _aaVersion
    ) external payable returns (address newAddress);

    /// @dev While the `_salt` parameter is not used anywhere here,
    /// it is still needed for consistency between `create` and
    /// `create2` functions (required by the compiler).
    function create(
        bytes32 _salt,
        bytes32 _bytecodeHash,
        bytes calldata _input
    ) external payable returns (address newAddress);

    /// @dev While `_salt` is never used here, we leave it here as a parameter
    /// for the consistency with the `create` function.
    function createAccount(
        bytes32 _salt,
        bytes32 _bytecodeHash,
        bytes calldata _input,
        AccountAbstractionVersion _aaVersion
    ) external payable returns (address newAddress);

    /// @notice Returns the information about a certain AA.
    function getAccountInfo(address _address) external view returns (AccountInfo memory info);

    /// @notice Can be called by an account to update its account version
    function updateAccountVersion(AccountAbstractionVersion _version) external;

    /// @notice Can be called by an account to update its nonce ordering
    function updateNonceOrdering(AccountNonceOrdering _nonceOrdering) external;
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

interface IEthToken {
    function balanceOf(uint256) external view returns (uint256);

    function transferFromTo(address _from, address _to, uint256 _amount) external;

    function totalSupply() external view returns (uint256);

    function name() external pure returns (string memory);

    function symbol() external pure returns (string memory);

    function decimals() external pure returns (uint8);

    function mint(address _account, uint256 _amount) external;

    function withdraw(address _l1Receiver) external payable;

    event Mint(address indexed account, uint256 amount);

    event Transfer(address indexed from, address indexed to, uint256 value);

    event Withdrawal(address indexed _l2Sender, address indexed _l1Receiver, uint256 _amount);
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

struct ImmutableData {
    uint256 index;
    bytes32 value;
}

interface IImmutableSimulator {
    function getImmutable(address _dest, uint256 _index) external view returns (bytes32);

    function setImmutables(address _dest, ImmutableData[] calldata _immutables) external;
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

interface IKnownCodesStorage {
    event MarkedAsKnown(bytes32 indexed bytecodeHash, bool indexed sendBytecodeToL1);

    function markFactoryDeps(bool _shouldSendToL1, bytes32[] calldata _hashes) external;

    function markBytecodeAsPublished(
        bytes32 _bytecodeHash,
        bytes32 _l1PreimageHash,
        uint256 _l1PreimageBytesLen
    ) external;

    function getMarker(bytes32 _hash) external view returns (uint256);
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

interface IL1Messenger {
    // Possibly in the future we will be able to track the messages sent to L1 with
    // some hooks in the VM. For now, it is much easier to track them with L2 events.
    event L1MessageSent(address indexed _sender, bytes32 indexed _hash, bytes _message);

    function sendToL1(bytes memory _message) external returns (bytes32);
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @author Matter Labs
 * @dev Interface of the nonce holder contract -- a contract used by the system to ensure
 * that there is always a unique identifier for a transaction with a particular account (we call it nonce).
 * In other words, the pair of (address, nonce) should always be unique.
 * @dev Custom accounts should use methods of this contract to store nonces or other possible unique identifiers
 * for the transaction.
 */
interface INonceHolder {
    event ValueSetUnderNonce(address indexed accountAddress, uint256 indexed key, uint256 value);

    /// @dev Returns the current minimal nonce for account.
    function getMinNonce(address _address) external view returns (uint256);

    /// @dev Returns the raw version of the current minimal nonce
    /// (equal to minNonce + 2^128 * deployment nonce).
    function getRawNonce(address _address) external view returns (uint256);

    /// @dev Increases the minimal nonce for the msg.sender.
    function increaseMinNonce(uint256 _value) external returns (uint256);

    /// @dev Sets the nonce value `key` as used.
    function setValueUnderNonce(uint256 _key, uint256 _value) external;

    /// @dev Gets the value stored inside a custom nonce.
    function getValueUnderNonce(uint256 _key) external view returns (uint256);

    /// @dev A convenience method to increment the minimal nonce if it is equal
    /// to the `_expectedNonce`.
    function incrementMinNonceIfEquals(uint256 _expectedNonce) external;

    /// @dev Returns the deployment nonce for the accounts used for CREATE opcode.
    function getDeploymentNonce(address _address) external view returns (uint256);

    /// @dev Increments the deployment nonce for the account and returns the previous one.
    function incrementDeploymentNonce(address _address) external returns (uint256);

    /// @dev Determines whether a certain nonce has been already used for an account.
    function validateNonceUsage(address _address, uint256 _key, bool _shouldBeUsed) external view;

    /// @dev Returns whether a nonce has been used for an account.
    function isNonceUsed(address _address, uint256 _nonce) external view returns (bool);
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "../libraries/TransactionHelper.sol";

enum ExecutionResult {
    Revert,
    Success
}

bytes4 constant PAYMASTER_VALIDATION_SUCCESS_MAGIC = IPaymaster.validateAndPayForPaymasterTransaction.selector;

interface IPaymaster {
    /// @dev Called by the bootloader to verify that the paymaster agrees to pay for the
    /// fee for the transaction. This transaction should also send the necessary amount of funds onto the bootloader
    /// address.
    /// @param _txHash The hash of the transaction
    /// @param _suggestedSignedHash The hash of the transaction that is signed by an EOA
    /// @param _transaction The transaction itself.
    /// @return magic The value that should be equal to the signature of the validateAndPayForPaymasterTransaction
    /// if the paymaster agrees to pay for the transaction.
    /// @return context The "context" of the transaction: an array of bytes of length at most 1024 bytes, which will be
    /// passed to the `postTransaction` method of the account.
    /// @dev The developer should strive to preserve as many steps as possible both for valid
    /// and invalid transactions as this very method is also used during the gas fee estimation
    /// (without some of the necessary data, e.g. signature).
    function validateAndPayForPaymasterTransaction(
        bytes32 _txHash,
        bytes32 _suggestedSignedHash,
        Transaction calldata _transaction
    ) external payable returns (bytes4 magic, bytes memory context);

    /// @dev Called by the bootloader after the execution of the transaction. Please note that
    /// there is no guarantee that this method will be called at all. Unlike the original EIP4337,
    /// this method won't be called if the transaction execution results in out-of-gas.
    /// @param _context, the context of the execution, returned by the "validateAndPayForPaymasterTransaction" method.
    /// @param  _transaction, the users' transaction.
    /// @param _txResult, the result of the transaction execution (success or failure).
    /// @param _maxRefundedGas, the upper bound on the amout of gas that could be refunded to the paymaster.
    /// @dev The exact amount refunded depends on the gas spent by the "postOp" itself and so the developers should
    /// take that into account.
    function postTransaction(
        bytes calldata _context,
        Transaction calldata _transaction,
        bytes32 _txHash,
        bytes32 _suggestedSignedHash,
        ExecutionResult _txResult,
        uint256 _maxRefundedGas
    ) external payable;
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @author Matter Labs
 * @dev The interface that is used for encoding/decoding of
 * different types of paymaster flows.
 * @notice This is NOT an interface to be implementated
 * by contracts. It is just used for encoding.
 */
interface IPaymasterFlow {
    function general(bytes calldata input) external;

    function approvalBased(address _token, uint256 _minAllowance, bytes calldata _innerInput) external;
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @author Matter Labs
 * @notice Contract that stores some of the context variables, that may be either
 * block-scoped, tx-scoped or system-wide.
 */
interface ISystemContext {
    function chainId() external view returns (uint256);

    function origin() external view returns (address);

    function gasPrice() external view returns (uint256);

    function blockGasLimit() external view returns (uint256);

    function coinbase() external view returns (address);

    function difficulty() external view returns (uint256);

    function baseFee() external view returns (uint256);

    function blockHash(uint256 _block) external view returns (bytes32);

    function getBlockHashEVM(uint256 _block) external view returns (bytes32);

    function getBlockNumberAndTimestamp() external view returns (uint256 blockNumber, uint256 blockTimestamp);

    // Note, that for now, the implementation of the bootloader allows this variables to
    // be incremented multiple times inside a block, so it should not relied upon right now.
    function getBlockNumber() external view returns (uint256);

    function getBlockTimestamp() external view returns (uint256);
}

// SPDX-License-Identifier: MIT OR Apache-2.0

pragma solidity ^0.8.0;

import "./SystemContractHelper.sol";
import "./Utils.sol";
import {SHA256_SYSTEM_CONTRACT, KECCAK256_SYSTEM_CONTRACT} from "../Constants.sol";

/**
 * @author Matter Labs
 * @notice This library is used to perform ultra-efficient calls using zkEVM-specific features.
 * @dev EVM calls always accept a memory slice as input and return a memory slice as output.
 * Therefore, even if the user has a ready-made calldata slice, they still need to copy it to memory
 * before calling. This is especially inefficient for large inputs (proxies, multi-calls, etc.).
 * In turn, zkEVM operates over a fat pointer, which is a set of (memory page, offset, start, length) in the memory/calldata/returndata.
 * This allows forwarding the calldata slice as is, without copying it to memory.
 * @dev Fat pointer is not just an integer, it is an extended data type supported on the VM level.
 * zkEVM creates the wellformed fat pointers for all the calldata/returndata regions, later
 * the contract may manipulate the already created fat pointers to forward a slice of the data, but not
 * to create new fat pointers!
 * @dev The allowed operation on fat pointers are:
 * 1. `ptr.add` - Transforms `ptr.offset` into `ptr.offset + u32(_value)`. If overflow happens then it panics.
 * 2. `ptr.sub` - Transforms `ptr.offset` into `ptr.offset - u32(_value)`. If underflow happens then it panics.
 * 3. `ptr.pack` - Do the concatenation between the lowest 128 bits of the pointer itself and the highest 128 bits of `_value`. It is typically used to prepare the ABI for external calls.
 * 4. `ptr.shrink` - Transforms `ptr.length` into `ptr.length - u32(_shrink)`. If underflow happens then it panics.
 * @dev The call opcodes accept the fat pointer and change it to its canonical form before passing it to the child call
 * 1. `ptr.start` is transformed into `ptr.offset + ptr.start`
 * 2. `ptr.length` is transformed into `ptr.length - ptr.offset`
 * 3. `ptr.offset` is transformed into `0`
 */
library EfficientCall {
    /// @notice Call the `keccak256` without copying calldata to memory.
    /// @param _data The preimage data.
    /// @return The `keccak256` hash.
    function keccak(bytes calldata _data) internal view returns (bytes32) {
        bytes memory returnData = staticCall(gasleft(), KECCAK256_SYSTEM_CONTRACT, _data);
        require(returnData.length == 32, "keccak256 returned invalid data");
        return bytes32(returnData);
    }

    /// @notice Call the `sha256` precompile without copying calldata to memory.
    /// @param _data The preimage data.
    /// @return The `sha256` hash.
    function sha(bytes calldata _data) internal view returns (bytes32) {
        bytes memory returnData = staticCall(gasleft(), SHA256_SYSTEM_CONTRACT, _data);
        require(returnData.length == 32, "sha returned invalid data");
        return bytes32(returnData);
    }

    /// @notice Perform a `call` without copying calldata to memory.
    /// @param _gas The gas to use for the call.
    /// @param _address The address to call.
    /// @param _value The `msg.value` to send.
    /// @param _data The calldata to use for the call.
    /// @param _isSystem Whether the call should contain the `isSystem` flag.
    /// @return returnData The copied to memory return data.
    function call(
        uint256 _gas,
        address _address,
        uint256 _value,
        bytes calldata _data,
        bool _isSystem
    ) internal returns (bytes memory returnData) {
        bool success = rawCall(_gas, _address, _value, _data, _isSystem);
        returnData = _verifyCallResult(success);
    }

    /// @notice Perform a `staticCall` without copying calldata to memory.
    /// @param _gas The gas to use for the call.
    /// @param _address The address to call.
    /// @param _data The calldata to use for the call.
    /// @return returnData The copied to memory return data.
    function staticCall(
        uint256 _gas,
        address _address,
        bytes calldata _data
    ) internal view returns (bytes memory returnData) {
        bool success = rawStaticCall(_gas, _address, _data);
        returnData = _verifyCallResult(success);
    }

    /// @notice Perform a `delegateCall` without copying calldata to memory.
    /// @param _gas The gas to use for the call.
    /// @param _address The address to call.
    /// @param _data The calldata to use for the call.
    /// @return returnData The copied to memory return data.
    function delegateCall(
        uint256 _gas,
        address _address,
        bytes calldata _data
    ) internal returns (bytes memory returnData) {
        bool success = rawDelegateCall(_gas, _address, _data);
        returnData = _verifyCallResult(success);
    }

    /// @notice Perform a `mimicCall` (a call with custom msg.sender) without copying calldata to memory.
    /// @param _gas The gas to use for the call.
    /// @param _address The address to call.
    /// @param _data The calldata to use for the call.
    /// @param _whoToMimic The `msg.sender` for the next call.
    /// @param _isConstructor Whether the call should contain the `isConstructor` flag.
    /// @param _isSystem Whether the call should contain the `isSystem` flag.
    /// @return returnData The copied to memory return data.
    function mimicCall(
        uint256 _gas,
        address _address,
        bytes calldata _data,
        address _whoToMimic,
        bool _isConstructor,
        bool _isSystem
    ) internal returns (bytes memory returnData) {
        bool success = rawMimicCall(_gas, _address, _data, _whoToMimic, _isConstructor, _isSystem);
        returnData = _verifyCallResult(success);
    }

    /// @notice Perform a `call` without copying calldata to memory.
    /// @param _gas The gas to use for the call.
    /// @param _address The address to call.
    /// @param _value The `msg.value` to send.
    /// @param _data The calldata to use for the call.
    /// @param _isSystem Whether the call should contain the `isSystem` flag.
    /// @return success whether the call was successful.
    function rawCall(
        uint256 _gas,
        address _address,
        uint256 _value,
        bytes calldata _data,
        bool _isSystem
    ) internal returns (bool success) {
        if (_value == 0) {
            _loadFarCallABIIntoActivePtr(_gas, _data, false, _isSystem);

            address callAddr = RAW_FAR_CALL_BY_REF_CALL_ADDRESS;
            assembly {
                success := call(_address, callAddr, 0, 0, 0xFFFF, 0, 0)
            }
        } else {
            _loadFarCallABIIntoActivePtr(_gas, _data, false, true);

            // If there is provided `msg.value` call the `MsgValueSimulator` to forward ether.
            address msgValueSimulator = MSG_VALUE_SYSTEM_CONTRACT;
            address callAddr = SYSTEM_CALL_BY_REF_CALL_ADDRESS;
            // We need to supply the mask to the MsgValueSimulator to denote
            // that the call should be a system one.
            uint256 forwardMask = _isSystem ? MSG_VALUE_SIMULATOR_IS_SYSTEM_BIT : 0;

            assembly {
                success := call(msgValueSimulator, callAddr, _value, _address, 0xFFFF, forwardMask, 0)
            }
        }
    }

    /// @notice Perform a `staticCall` without copying calldata to memory.
    /// @param _gas The gas to use for the call.
    /// @param _address The address to call.
    /// @param _data The calldata to use for the call.
    /// @return success whether the call was successful.
    function rawStaticCall(uint256 _gas, address _address, bytes calldata _data) internal view returns (bool success) {
        _loadFarCallABIIntoActivePtr(_gas, _data, false, false);

        address callAddr = RAW_FAR_CALL_BY_REF_CALL_ADDRESS;
        assembly {
            success := staticcall(_address, callAddr, 0, 0xFFFF, 0, 0)
        }
    }

    /// @notice Perform a `delegatecall` without copying calldata to memory.
    /// @param _gas The gas to use for the call.
    /// @param _address The address to call.
    /// @param _data The calldata to use for the call.
    /// @return success whether the call was successful.
    function rawDelegateCall(uint256 _gas, address _address, bytes calldata _data) internal returns (bool success) {
        _loadFarCallABIIntoActivePtr(_gas, _data, false, false);

        address callAddr = RAW_FAR_CALL_BY_REF_CALL_ADDRESS;
        assembly {
            success := delegatecall(_address, callAddr, 0, 0xFFFF, 0, 0)
        }
    }

    /// @notice Perform a `mimicCall` (call with custom msg.sender) without copying calldata to memory.
    /// @param _gas The gas to use for the call.
    /// @param _address The address to call.
    /// @param _data The calldata to use for the call.
    /// @param _whoToMimic The `msg.sender` for the next call.
    /// @param _isConstructor Whether the call should contain the `isConstructor` flag.
    /// @param _isSystem Whether the call should contain the `isSystem` flag.
    /// @return success whether the call was successful.
    /// @dev If called not in kernel mode, it will result in a revert (enforced by the VM)
    function rawMimicCall(
        uint256 _gas,
        address _address,
        bytes calldata _data,
        address _whoToMimic,
        bool _isConstructor,
        bool _isSystem
    ) internal returns (bool success) {
        _loadFarCallABIIntoActivePtr(_gas, _data, _isConstructor, _isSystem);

        address callAddr = MIMIC_CALL_BY_REF_CALL_ADDRESS;
        uint256 cleanupMask = ADDRESS_MASK;
        assembly {
            // Clearing values before usage in assembly, since Solidity
            // doesn't do it by default
            _whoToMimic := and(_whoToMimic, cleanupMask)

            success := call(_address, callAddr, 0, 0, _whoToMimic, 0, 0)
        }
    }

    /// @dev Verify that a low-level call was successful, and revert if it wasn't, by bubbling the revert reason.
    /// @param _success Whether the call was successful.
    /// @return returnData The copied to memory return data.
    function _verifyCallResult(bool _success) private pure returns (bytes memory returnData) {
        if (_success) {
            uint256 size;
            assembly {
                size := returndatasize()
            }

            returnData = new bytes(size);
            assembly {
                returndatacopy(add(returnData, 0x20), 0, size)
            }
        } else {
            propagateRevert();
        }
    }

    /// @dev Propagate the revert reason from the current call to the caller.
    function propagateRevert() internal pure {
        assembly {
            let size := returndatasize()
            returndatacopy(0, 0, size)
            revert(0, size)
        }
    }

    /// @dev Load the far call ABI into active ptr, that will be used for the next call by reference.
    /// @param _gas The gas to be passed to the call.
    /// @param _data The calldata to be passed to the call.
    /// @param _isConstructor Whether the call is a constructor call.
    /// @param _isSystem Whether the call is a system call.
    function _loadFarCallABIIntoActivePtr(
        uint256 _gas,
        bytes calldata _data,
        bool _isConstructor,
        bool _isSystem
    ) private view {
        SystemContractHelper.loadCalldataIntoActivePtr();

        // Currently, zkEVM considers the pointer valid if(ptr.offset < ptr.length || (ptr.length == 0 && ptr.offset == 0)), otherwise panics.
        // So, if the data is empty we need to make the `ptr.length = ptr.offset = 0`, otherwise follow standard logic.
        if (_data.length == 0) {
            // Safe to cast, offset is never bigger than `type(uint32).max`
            SystemContractHelper.ptrShrinkIntoActive(uint32(msg.data.length));
        } else {
            uint256 dataOffset;
            assembly {
                dataOffset := _data.offset
            }

            // Safe to cast, offset is never bigger than `type(uint32).max`
            SystemContractHelper.ptrAddIntoActive(uint32(dataOffset));
            // Safe to cast, `data.length` is never bigger than `type(uint32).max`
            uint32 shrinkTo = uint32(msg.data.length - (_data.length + dataOffset));
            SystemContractHelper.ptrShrinkIntoActive(shrinkTo);
        }

        uint32 gas = Utils.safeCastToU32(_gas);
        uint256 farCallAbi = SystemContractsCaller.getFarCallABIWithEmptyFatPointer(
            gas,
            // Only rollup is supported for now
            0,
            CalldataForwardingMode.ForwardFatPointer,
            _isConstructor,
            _isSystem
        );
        SystemContractHelper.ptrPackIntoActivePtr(farCallAbi);
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

library RLPEncoder {
    function encodeAddress(address _val) internal pure returns (bytes memory encoded) {
        // The size is equal to 20 bytes of the address itself + 1 for encoding bytes length in RLP.
        encoded = new bytes(0x15);

        bytes20 shiftedVal = bytes20(_val);
        assembly {
            // In the first byte we write the encoded length as 0x80 + 0x14 == 0x94.
            mstore(add(encoded, 0x20), 0x9400000000000000000000000000000000000000000000000000000000000000)
            // Write address data without stripping zeros.
            mstore(add(encoded, 0x21), shiftedVal)
        }
    }

    function encodeUint256(uint256 _val) internal pure returns (bytes memory encoded) {
        unchecked {
            if (_val < 128) {
                encoded = new bytes(1);
                // Handle zero as a non-value, since stripping zeroes results in an empty byte array
                encoded[0] = (_val == 0) ? bytes1(uint8(128)) : bytes1(uint8(_val));
            } else {
                uint256 hbs = _highestByteSet(_val);

                encoded = new bytes(hbs + 2);
                encoded[0] = bytes1(uint8(hbs + 0x81));

                uint256 lbs = 31 - hbs;
                uint256 shiftedVal = _val << (lbs * 8);

                assembly {
                    mstore(add(encoded, 0x21), shiftedVal)
                }
            }
        }
    }

    /// @notice Encodes the size of bytes in RLP format.
    /// @param _len The length of the bytes to encode. It has a `uint64` type since as larger values are not supported.
    /// NOTE: panics if the length is 1 since the length encoding is ambiguous in this case.
    function encodeNonSingleBytesLen(uint64 _len) internal pure returns (bytes memory) {
        assert(_len != 1);
        return _encodeLength(_len, 0x80);
    }

    /// @notice Encodes the size of list items in RLP format.
    /// @param _len The length of the bytes to encode. It has a `uint64` type since as larger values are not supported.
    function encodeListLen(uint64 _len) internal pure returns (bytes memory) {
        return _encodeLength(_len, 0xc0);
    }

    function _encodeLength(uint64 _len, uint256 _offset) private pure returns (bytes memory encoded) {
        unchecked {
            if (_len < 56) {
                encoded = new bytes(1);
                encoded[0] = bytes1(uint8(_len + _offset));
            } else {
                uint256 hbs = _highestByteSet(uint256(_len));

                encoded = new bytes(hbs + 2);
                encoded[0] = bytes1(uint8(_offset + hbs + 56));

                uint256 lbs = 31 - hbs;
                uint256 shiftedVal = uint256(_len) << (lbs * 8);

                assembly {
                    mstore(add(encoded, 0x21), shiftedVal)
                }
            }
        }
    }

    /// @notice Computes the index of the highest byte set in number.
    /// @notice Uses little endian ordering (The least significant byte has index `0`).
    /// NOTE: returns `0` for `0`
    function _highestByteSet(uint256 _number) private pure returns (uint256 hbs) {
        unchecked {
            if (_number > type(uint128).max) {
                _number >>= 128;
                hbs += 16;
            }
            if (_number > type(uint64).max) {
                _number >>= 64;
                hbs += 8;
            }
            if (_number > type(uint32).max) {
                _number >>= 32;
                hbs += 4;
            }
            if (_number > type(uint16).max) {
                _number >>= 16;
                hbs += 2;
            }
            if (_number > type(uint8).max) {
                hbs += 1;
            }
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8;

import {MAX_SYSTEM_CONTRACT_ADDRESS, MSG_VALUE_SYSTEM_CONTRACT} from "../Constants.sol";

import "./SystemContractsCaller.sol";
import "./Utils.sol";

uint256 constant UINT32_MASK = 0xffffffff;
uint256 constant UINT128_MASK = 0xffffffffffffffffffffffffffffffff;
/// @dev The mask that is used to convert any uint256 to a proper address.
/// It needs to be padded with `00` to be treated as uint256 by Solidity
uint256 constant ADDRESS_MASK = 0x00ffffffffffffffffffffffffffffffffffffffff;

struct ZkSyncMeta {
    uint32 gasPerPubdataByte;
    uint32 heapSize;
    uint32 auxHeapSize;
    uint8 shardId;
    uint8 callerShardId;
    uint8 codeShardId;
}

enum Global {
    CalldataPtr,
    CallFlags,
    ExtraABIData1,
    ExtraABIData2,
    ReturndataPtr
}

/**
 * @author Matter Labs
 * @notice Library used for accessing zkEVM-specific opcodes, needed for the development
 * of system contracts.
 * @dev While this library will be eventually available to public, some of the provided
 * methods won't work for non-system contracts. We will not recommend this library
 * for external use.
 */
library SystemContractHelper {
    /// @notice Send an L2Log to L1.
    /// @param _isService The `isService` flag.
    /// @param _key The `key` part of the L2Log.
    /// @param _value The `value` part of the L2Log.
    /// @dev The meaning of all these parameters is context-dependent, but they
    /// have no intrinsic meaning per se.
    function toL1(bool _isService, bytes32 _key, bytes32 _value) internal {
        address callAddr = TO_L1_CALL_ADDRESS;
        assembly {
            // Ensuring that the type is bool
            _isService := and(_isService, 1)
            // This `success` is always 0, but the method always succeeds
            // (except for the cases when there is not enough gas)
            let success := call(_isService, callAddr, _key, _value, 0xFFFF, 0, 0)
        }
    }

    /// @notice Get address of the currently executed code.
    /// @dev This allows differentiating between `call` and `delegatecall`.
    /// During the former `this` and `codeAddress` are the same, while
    /// during the latter they are not.
    function getCodeAddress() internal view returns (address addr) {
        address callAddr = CODE_ADDRESS_CALL_ADDRESS;
        assembly {
            addr := staticcall(0, callAddr, 0, 0xFFFF, 0, 0)
        }
    }

    /// @notice Provide a compiler hint, by placing calldata fat pointer into virtual `ACTIVE_PTR`,
    /// that can be manipulated by `ptr.add`/`ptr.sub`/`ptr.pack`/`ptr.shrink` later.
    /// @dev This allows making a call by forwarding calldata pointer to the child call.
    /// It is a much more efficient way to forward calldata, than standard EVM bytes copying.
    function loadCalldataIntoActivePtr() internal view {
        address callAddr = LOAD_CALLDATA_INTO_ACTIVE_PTR_CALL_ADDRESS;
        assembly {
            pop(staticcall(0, callAddr, 0, 0xFFFF, 0, 0))
        }
    }

    /// @notice Compiler simulation of the `ptr.pack` opcode for the virtual `ACTIVE_PTR` pointer.
    /// @dev Do the concatenation between lowest part of `ACTIVE_PTR` and highest part of `_farCallAbi`
    /// forming packed fat pointer for a far call or ret ABI when necessary.
    /// Note: Panics if the lowest 128 bits of `_farCallAbi` are not zeroes.
    function ptrPackIntoActivePtr(uint256 _farCallAbi) internal view {
        address callAddr = PTR_PACK_INTO_ACTIVE_CALL_ADDRESS;
        assembly {
            pop(staticcall(_farCallAbi, callAddr, 0, 0xFFFF, 0, 0))
        }
    }

    /// @notice Compiler simulation of the `ptr.add` opcode for the virtual `ACTIVE_PTR` pointer.
    /// @dev Transforms `ACTIVE_PTR.offset` into `ACTIVE_PTR.offset + u32(_value)`. If overflow happens then it panics.
    function ptrAddIntoActive(uint32 _value) internal view {
        address callAddr = PTR_ADD_INTO_ACTIVE_CALL_ADDRESS;
        uint256 cleanupMask = UINT32_MASK;
        assembly {
            // Clearing input params as they are not cleaned by Solidity by default
            _value := and(_value, cleanupMask)
            pop(staticcall(_value, callAddr, 0, 0xFFFF, 0, 0))
        }
    }

    /// @notice Compiler simulation of the `ptr.shrink` opcode for the virtual `ACTIVE_PTR` pointer.
    /// @dev Transforms `ACTIVE_PTR.length` into `ACTIVE_PTR.length - u32(_shrink)`. If underflow happens then it panics.
    function ptrShrinkIntoActive(uint32 _shrink) internal view {
        address callAddr = PTR_SHRINK_INTO_ACTIVE_CALL_ADDRESS;
        uint256 cleanupMask = UINT32_MASK;
        assembly {
            // Clearing input params as they are not cleaned by Solidity by default
            _shrink := and(_shrink, cleanupMask)
            pop(staticcall(_shrink, callAddr, 0, 0xFFFF, 0, 0))
        }
    }

    /// @notice packs precompile parameters into one word
    /// @param _inputMemoryOffset The memory offset in 32-byte words for the input data for calling the precompile.
    /// @param _inputMemoryLength The length of the input data in words.
    /// @param _outputMemoryOffset The memory offset in 32-byte words for the output data.
    /// @param _outputMemoryLength The length of the output data in words.
    /// @param _perPrecompileInterpreted The constant, the meaning of which is defined separately for
    /// each precompile. For information, please read the documentation of the precompilecall log in
    /// the VM.
    function packPrecompileParams(
        uint32 _inputMemoryOffset,
        uint32 _inputMemoryLength,
        uint32 _outputMemoryOffset,
        uint32 _outputMemoryLength,
        uint64 _perPrecompileInterpreted
    ) internal pure returns (uint256 rawParams) {
        rawParams = _inputMemoryOffset;
        rawParams |= uint256(_inputMemoryLength) << 32;
        rawParams |= uint256(_outputMemoryOffset) << 64;
        rawParams |= uint256(_outputMemoryLength) << 96;
        rawParams |= uint256(_perPrecompileInterpreted) << 192;
    }

    /// @notice Call precompile with given parameters.
    /// @param _rawParams The packed precompile params. They can be retrieved by
    /// the `packPrecompileParams` method.
    /// @param _gasToBurn The number of gas to burn during this call.
    /// @return success Whether the call was successful.
    /// @dev The list of currently available precompiles sha256, keccak256, ecrecover.
    /// NOTE: The precompile type depends on `this` which calls precompile, which means that only
    /// system contracts corresponding to the list of precompiles above can do `precompileCall`.
    /// @dev If used not in the `sha256`, `keccak256` or `ecrecover` contracts, it will just burn the gas provided.
    function precompileCall(uint256 _rawParams, uint32 _gasToBurn) internal view returns (bool success) {
        address callAddr = PRECOMPILE_CALL_ADDRESS;

        // After `precompileCall` gas will be burned down to 0 if there are not enough of them,
        // thats why it should be checked before the call.
        require(gasleft() >= _gasToBurn);
        uint256 cleanupMask = UINT32_MASK;
        assembly {
            // Clearing input params as they are not cleaned by Solidity by default
            _gasToBurn := and(_gasToBurn, cleanupMask)
            success := staticcall(_rawParams, callAddr, _gasToBurn, 0xFFFF, 0, 0)
        }
    }

    /// @notice Set `msg.value` to next far call.
    /// @param _value The msg.value that will be used for the *next* call.
    /// @dev If called not in kernel mode, it will result in a revert (enforced by the VM)
    function setValueForNextFarCall(uint128 _value) internal returns (bool success) {
        uint256 cleanupMask = UINT128_MASK;
        address callAddr = SET_CONTEXT_VALUE_CALL_ADDRESS;
        assembly {
            // Clearing input params as they are not cleaned by Solidity by default
            _value := and(_value, cleanupMask)
            success := call(0, callAddr, _value, 0, 0xFFFF, 0, 0)
        }
    }

    /// @notice Initialize a new event.
    /// @param initializer The event initializing value.
    /// @param value1 The first topic or data chunk.
    function eventInitialize(uint256 initializer, uint256 value1) internal {
        address callAddr = EVENT_INITIALIZE_ADDRESS;
        assembly {
            pop(call(initializer, callAddr, value1, 0, 0xFFFF, 0, 0))
        }
    }

    /// @notice Continue writing the previously initialized event.
    /// @param value1 The first topic or data chunk.
    /// @param value2 The second topic or data chunk.
    function eventWrite(uint256 value1, uint256 value2) internal {
        address callAddr = EVENT_WRITE_ADDRESS;
        assembly {
            pop(call(value1, callAddr, value2, 0, 0xFFFF, 0, 0))
        }
    }

    /// @notice Get the packed representation of the `ZkSyncMeta` from the current context.
    /// @return meta The packed representation of the ZkSyncMeta.
    /// @dev The fields in ZkSyncMeta are NOT tightly packed, i.e. there is a special rule on how
    /// they are packed. For more information, please read the documentation on ZkSyncMeta.
    function getZkSyncMetaBytes() internal view returns (uint256 meta) {
        address callAddr = META_CALL_ADDRESS;
        assembly {
            meta := staticcall(0, callAddr, 0, 0xFFFF, 0, 0)
        }
    }

    /// @notice Returns the bits [offset..offset+size-1] of the meta.
    /// @param meta Packed representation of the ZkSyncMeta.
    /// @param offset The offset of the bits.
    /// @param size The size of the extracted number in bits.
    /// @return result The extracted number.
    function extractNumberFromMeta(uint256 meta, uint256 offset, uint256 size) internal pure returns (uint256 result) {
        // Firstly, we delete all the bits after the field
        uint256 shifted = (meta << (256 - size - offset));
        // Then we shift everything back
        result = (shifted >> (256 - size));
    }

    /// @notice Given the packed representation of `ZkSyncMeta`, retrieves the number of gas
    /// that a single byte sent to L1 as pubdata costs.
    /// @param meta Packed representation of the ZkSyncMeta.
    /// @return gasPerPubdataByte The current price in gas per pubdata byte.
    function getGasPerPubdataByteFromMeta(uint256 meta) internal pure returns (uint32 gasPerPubdataByte) {
        gasPerPubdataByte = uint32(extractNumberFromMeta(meta, META_GAS_PER_PUBDATA_BYTE_OFFSET, 32));
    }

    /// @notice Given the packed representation of `ZkSyncMeta`, retrieves the number of the current size
    /// of the heap in bytes.
    /// @param meta Packed representation of the ZkSyncMeta.
    /// @return heapSize The size of the memory in bytes byte.
    /// @dev The following expression: getHeapSizeFromMeta(getZkSyncMetaBytes()) is
    /// equivalent to the MSIZE in Solidity.
    function getHeapSizeFromMeta(uint256 meta) internal pure returns (uint32 heapSize) {
        heapSize = uint32(extractNumberFromMeta(meta, META_HEAP_SIZE_OFFSET, 32));
    }

    /// @notice Given the packed representation of `ZkSyncMeta`, retrieves the number of the current size
    /// of the auxilary heap in bytes.
    /// @param meta Packed representation of the ZkSyncMeta.
    /// @return auxHeapSize The size of the auxilary memory in bytes byte.
    /// @dev You can read more on auxilary memory in the VM1.2 documentation.
    function getAuxHeapSizeFromMeta(uint256 meta) internal pure returns (uint32 auxHeapSize) {
        auxHeapSize = uint32(extractNumberFromMeta(meta, META_AUX_HEAP_SIZE_OFFSET, 32));
    }

    /// @notice Given the packed representation of `ZkSyncMeta`, retrieves the shardId of `this`.
    /// @param meta Packed representation of the ZkSyncMeta.
    /// @return shardId The shardId of `this`.
    /// @dev Currently only shard 0 (zkRollup) is supported.
    function getShardIdFromMeta(uint256 meta) internal pure returns (uint8 shardId) {
        shardId = uint8(extractNumberFromMeta(meta, META_SHARD_ID_OFFSET, 8));
    }

    /// @notice Given the packed representation of `ZkSyncMeta`, retrieves the shardId of
    /// the msg.sender.
    /// @param meta Packed representation of the ZkSyncMeta.
    /// @return callerShardId The shardId of the msg.sender.
    /// @dev Currently only shard 0 (zkRollup) is supported.
    function getCallerShardIdFromMeta(uint256 meta) internal pure returns (uint8 callerShardId) {
        callerShardId = uint8(extractNumberFromMeta(meta, META_CALLER_SHARD_ID_OFFSET, 8));
    }

    /// @notice Given the packed representation of `ZkSyncMeta`, retrieves the shardId of
    /// the currently executed code.
    /// @param meta Packed representation of the ZkSyncMeta.
    /// @return codeShardId The shardId of the currently executed code.
    /// @dev Currently only shard 0 (zkRollup) is supported.
    function getCodeShardIdFromMeta(uint256 meta) internal pure returns (uint8 codeShardId) {
        codeShardId = uint8(extractNumberFromMeta(meta, META_CODE_SHARD_ID_OFFSET, 8));
    }

    /// @notice Retrieves the ZkSyncMeta structure.
    /// @return meta The ZkSyncMeta execution context parameters.
    function getZkSyncMeta() internal view returns (ZkSyncMeta memory meta) {
        uint256 metaPacked = getZkSyncMetaBytes();
        meta.gasPerPubdataByte = getGasPerPubdataByteFromMeta(metaPacked);
        meta.shardId = getShardIdFromMeta(metaPacked);
        meta.callerShardId = getCallerShardIdFromMeta(metaPacked);
        meta.codeShardId = getCodeShardIdFromMeta(metaPacked);
    }

    /// @notice Returns the call flags for the current call.
    /// @return callFlags The bitmask of the callflags.
    /// @dev Call flags is the value of the first register
    /// at the start of the call.
    /// @dev The zero bit of the callFlags indicates whether the call is
    /// a constructor call. The first bit of the callFlags indicates whether
    /// the call is a system one.
    function getCallFlags() internal view returns (uint256 callFlags) {
        address callAddr = CALLFLAGS_CALL_ADDRESS;
        assembly {
            callFlags := staticcall(0, callAddr, 0, 0xFFFF, 0, 0)
        }
    }

    /// @notice Returns the current calldata pointer.
    /// @return ptr The current calldata pointer.
    /// @dev NOTE: This file is just an integer and it can not be used
    /// to forward the calldata to the next calls in any way.
    function getCalldataPtr() internal view returns (uint256 ptr) {
        address callAddr = PTR_CALLDATA_CALL_ADDRESS;
        assembly {
            ptr := staticcall(0, callAddr, 0, 0xFFFF, 0, 0)
        }
    }

    /// @notice Returns the N-th extraAbiParam for the current call.
    /// @return extraAbiData The value of the N-th extraAbiParam for this call.
    /// @dev It is equal to the value of the (N+2)-th register
    /// at the start of the call.
    function getExtraAbiData(uint256 index) internal view returns (uint256 extraAbiData) {
        require(index < 10, "There are only 10 accessible registers");

        address callAddr = GET_EXTRA_ABI_DATA_ADDRESS;
        assembly {
            extraAbiData := staticcall(index, callAddr, 0, 0xFFFF, 0, 0)
        }
    }

    /// @notice Retuns whether the current call is a system call.
    /// @return `true` or `false` based on whether the current call is a system call.
    function isSystemCall() internal view returns (bool) {
        uint256 callFlags = getCallFlags();
        // When the system call is passed, the 2-bit it set to 1
        return (callFlags & 2) != 0;
    }

    /// @notice Returns whether the address is a system contract.
    /// @param _address The address to test
    /// @return `true` or `false` based on whether the `_address` is a system contract.
    function isSystemContract(address _address) internal pure returns (bool) {
        return uint160(_address) <= uint160(MAX_SYSTEM_CONTRACT_ADDRESS);
    }
}

/// @dev Solidity does not allow exporting modifiers via libraries, so
/// the only way to do reuse modifiers is to have a base contract
abstract contract ISystemContract {
    /// @notice Modifier that makes sure that the method
    /// can only be called via a system call.
    modifier onlySystemCall() {
        require(
            SystemContractHelper.isSystemCall() || SystemContractHelper.isSystemContract(msg.sender),
            "This method require system call flag"
        );
        _;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8;

import {MSG_VALUE_SYSTEM_CONTRACT, MSG_VALUE_SIMULATOR_IS_SYSTEM_BIT} from "../Constants.sol";
import "./Utils.sol";

// Addresses used for the compiler to be replaced with the
// zkSync-specific opcodes during the compilation.
// IMPORTANT: these are just compile-time constants and are used
// only if used in-place by Yul optimizer.
address constant TO_L1_CALL_ADDRESS = address((1 << 16) - 1);
address constant CODE_ADDRESS_CALL_ADDRESS = address((1 << 16) - 2);
address constant PRECOMPILE_CALL_ADDRESS = address((1 << 16) - 3);
address constant META_CALL_ADDRESS = address((1 << 16) - 4);
address constant MIMIC_CALL_CALL_ADDRESS = address((1 << 16) - 5);
address constant SYSTEM_MIMIC_CALL_CALL_ADDRESS = address((1 << 16) - 6);
address constant MIMIC_CALL_BY_REF_CALL_ADDRESS = address((1 << 16) - 7);
address constant SYSTEM_MIMIC_CALL_BY_REF_CALL_ADDRESS = address((1 << 16) - 8);
address constant RAW_FAR_CALL_CALL_ADDRESS = address((1 << 16) - 9);
address constant RAW_FAR_CALL_BY_REF_CALL_ADDRESS = address((1 << 16) - 10);
address constant SYSTEM_CALL_CALL_ADDRESS = address((1 << 16) - 11);
address constant SYSTEM_CALL_BY_REF_CALL_ADDRESS = address((1 << 16) - 12);
address constant SET_CONTEXT_VALUE_CALL_ADDRESS = address((1 << 16) - 13);
address constant SET_PUBDATA_PRICE_CALL_ADDRESS = address((1 << 16) - 14);
address constant INCREMENT_TX_COUNTER_CALL_ADDRESS = address((1 << 16) - 15);
address constant PTR_CALLDATA_CALL_ADDRESS = address((1 << 16) - 16);
address constant CALLFLAGS_CALL_ADDRESS = address((1 << 16) - 17);
address constant PTR_RETURNDATA_CALL_ADDRESS = address((1 << 16) - 18);
address constant EVENT_INITIALIZE_ADDRESS = address((1 << 16) - 19);
address constant EVENT_WRITE_ADDRESS = address((1 << 16) - 20);
address constant LOAD_CALLDATA_INTO_ACTIVE_PTR_CALL_ADDRESS = address((1 << 16) - 21);
address constant LOAD_LATEST_RETURNDATA_INTO_ACTIVE_PTR_CALL_ADDRESS = address((1 << 16) - 22);
address constant PTR_ADD_INTO_ACTIVE_CALL_ADDRESS = address((1 << 16) - 23);
address constant PTR_SHRINK_INTO_ACTIVE_CALL_ADDRESS = address((1 << 16) - 24);
address constant PTR_PACK_INTO_ACTIVE_CALL_ADDRESS = address((1 << 16) - 25);
address constant MULTIPLICATION_HIGH_ADDRESS = address((1 << 16) - 26);
address constant GET_EXTRA_ABI_DATA_ADDRESS = address((1 << 16) - 27);

// All the offsets are in bits
uint256 constant META_GAS_PER_PUBDATA_BYTE_OFFSET = 0 * 8;
uint256 constant META_HEAP_SIZE_OFFSET = 8 * 8;
uint256 constant META_AUX_HEAP_SIZE_OFFSET = 12 * 8;
uint256 constant META_SHARD_ID_OFFSET = 28 * 8;
uint256 constant META_CALLER_SHARD_ID_OFFSET = 29 * 8;
uint256 constant META_CODE_SHARD_ID_OFFSET = 30 * 8;

/// @notice The way to forward the calldata:
/// - Use the current heap (i.e. the same as on EVM).
/// - Use the auxiliary heap.
/// - Forward via a pointer
/// @dev Note, that currently, users do not have access to the auxiliary
/// heap and so the only type of forwarding that will be used by the users
/// are UseHeap and ForwardFatPointer for forwarding a slice of the current calldata
/// to the next call.
enum CalldataForwardingMode {
    UseHeap,
    ForwardFatPointer,
    UseAuxHeap
}

/**
 * @author Matter Labs
 * @notice A library that allows calling contracts with the `isSystem` flag.
 * @dev It is needed to call ContractDeployer and NonceHolder.
 */
library SystemContractsCaller {
    /// @notice Makes a call with the `isSystem` flag.
    /// @param gasLimit The gas limit for the call.
    /// @param to The address to call.
    /// @param value The value to pass with the transaction.
    /// @param data The calldata.
    /// @return success Whether the transaction has been successful.
    /// @dev Note, that the `isSystem` flag can only be set when calling system contracts.
    function systemCall(uint32 gasLimit, address to, uint256 value, bytes memory data) internal returns (bool success) {
        address callAddr = SYSTEM_CALL_CALL_ADDRESS;

        uint32 dataStart;
        assembly {
            dataStart := add(data, 0x20)
        }
        uint32 dataLength = uint32(Utils.safeCastToU32(data.length));

        uint256 farCallAbi = SystemContractsCaller.getFarCallABI(
            0,
            0,
            dataStart,
            dataLength,
            gasLimit,
            // Only rollup is supported for now
            0,
            CalldataForwardingMode.UseHeap,
            false,
            true
        );

        if (value == 0) {
            // Doing the system call directly
            assembly {
                success := call(to, callAddr, 0, 0, farCallAbi, 0, 0)
            }
        } else {
            address msgValueSimulator = MSG_VALUE_SYSTEM_CONTRACT;
            // We need to supply the mask to the MsgValueSimulator to denote
            // that the call should be a system one.
            uint256 forwardMask = MSG_VALUE_SIMULATOR_IS_SYSTEM_BIT;

            assembly {
                success := call(msgValueSimulator, callAddr, value, to, farCallAbi, forwardMask, 0)
            }
        }
    }

    /// @notice Makes a call with the `isSystem` flag.
    /// @param gasLimit The gas limit for the call.
    /// @param to The address to call.
    /// @param value The value to pass with the transaction.
    /// @param data The calldata.
    /// @return success Whether the transaction has been successful.
    /// @return returnData The returndata of the transaction (revert reason in case the transaction has failed).
    /// @dev Note, that the `isSystem` flag can only be set when calling system contracts.
    function systemCallWithReturndata(
        uint32 gasLimit,
        address to,
        uint128 value,
        bytes memory data
    ) internal returns (bool success, bytes memory returnData) {
        success = systemCall(gasLimit, to, value, data);

        uint256 size;
        assembly {
            size := returndatasize()
        }

        returnData = new bytes(size);
        assembly {
            returndatacopy(add(returnData, 0x20), 0, size)
        }
    }

    /// @notice Makes a call with the `isSystem` flag.
    /// @param gasLimit The gas limit for the call.
    /// @param to The address to call.
    /// @param value The value to pass with the transaction.
    /// @param data The calldata.
    /// @return returnData The returndata of the transaction. In case the transaction reverts, the error
    /// bubbles up to the parent frame.
    /// @dev Note, that the `isSystem` flag can only be set when calling system contracts.
    function systemCallWithPropagatedRevert(
        uint32 gasLimit,
        address to,
        uint128 value,
        bytes memory data
    ) internal returns (bytes memory returnData) {
        bool success;
        (success, returnData) = systemCallWithReturndata(gasLimit, to, value, data);

        if (!success) {
            assembly {
                let size := mload(returnData)
                revert(add(returnData, 0x20), size)
            }
        }
    }

    /// @notice Calculates the packed representation of the FarCallABI.
    /// @param dataOffset Calldata offset in memory. Provide 0 unless using custom pointer.
    /// @param memoryPage Memory page to use. Provide 0 unless using custom pointer.
    /// @param dataStart The start of the calldata slice. Provide the offset in memory
    /// if not using custom pointer.
    /// @param dataLength The calldata length. Provide the length of the calldata in bytes
    /// unless using custom pointer.
    /// @param gasPassed The gas to pass with the call.
    /// @param shardId Of the account to call. Currently only 0 is supported.
    /// @param forwardingMode The forwarding mode to use:
    /// - provide CalldataForwardingMode.UseHeap when using your current memory
    /// - provide CalldataForwardingMode.ForwardFatPointer when using custom pointer.
    /// @param isConstructorCall Whether the call will be a call to the constructor
    /// (ignored when the caller is not a system contract).
    /// @param isSystemCall Whether the call will have the `isSystem` flag.
    /// @return farCallAbi The far call ABI.
    /// @dev The `FarCallABI` has the following structure:
    /// pub struct FarCallABI {
    ///     pub memory_quasi_fat_pointer: FatPointer,
    ///     pub gas_passed: u32,
    ///     pub shard_id: u8,
    ///     pub forwarding_mode: FarCallForwardPageType,
    ///     pub constructor_call: bool,
    ///     pub to_system: bool,
    /// }
    ///
    /// The FatPointer struct:
    ///
    /// pub struct FatPointer {
    ///     pub offset: u32, // offset relative to `start`
    ///     pub memory_page: u32, // memory page where slice is located
    ///     pub start: u32, // absolute start of the slice
    ///     pub length: u32, // length of the slice
    /// }
    ///
    /// @dev Note, that the actual layout is the following:
    ///
    /// [0..32) bits -- the calldata offset
    /// [32..64) bits -- the memory page to use. Can be left blank in most of the cases.
    /// [64..96) bits -- the absolute start of the slice
    /// [96..128) bits -- the length of the slice.
    /// [128..192) bits -- empty bits.
    /// [192..224) bits -- gasPassed.
    /// [224..232) bits -- forwarding_mode
    /// [232..240) bits -- shard id.
    /// [240..248) bits -- constructor call flag
    /// [248..256] bits -- system call flag
    function getFarCallABI(
        uint32 dataOffset,
        uint32 memoryPage,
        uint32 dataStart,
        uint32 dataLength,
        uint32 gasPassed,
        uint8 shardId,
        CalldataForwardingMode forwardingMode,
        bool isConstructorCall,
        bool isSystemCall
    ) internal pure returns (uint256 farCallAbi) {
        // Fill in the call parameter fields
        farCallAbi = getFarCallABIWithEmptyFatPointer(
            gasPassed,
            shardId,
            forwardingMode,
            isConstructorCall,
            isSystemCall
        );
        // Fill in the fat pointer fields
        farCallAbi |= dataOffset;
        farCallAbi |= (uint256(memoryPage) << 32);
        farCallAbi |= (uint256(dataStart) << 64);
        farCallAbi |= (uint256(dataLength) << 96);
    }

    /// @notice Calculates the packed representation of the FarCallABI with zero fat pointer fields.
    /// @param gasPassed The gas to pass with the call.
    /// @param shardId Of the account to call. Currently only 0 is supported.
    /// @param forwardingMode The forwarding mode to use:
    /// - provide CalldataForwardingMode.UseHeap when using your current memory
    /// - provide CalldataForwardingMode.ForwardFatPointer when using custom pointer.
    /// @param isConstructorCall Whether the call will be a call to the constructor
    /// (ignored when the caller is not a system contract).
    /// @param isSystemCall Whether the call will have the `isSystem` flag.
    /// @return farCallAbiWithEmptyFatPtr The far call ABI with zero fat pointer fields.
    function getFarCallABIWithEmptyFatPointer(
        uint32 gasPassed,
        uint8 shardId,
        CalldataForwardingMode forwardingMode,
        bool isConstructorCall,
        bool isSystemCall
    ) internal pure returns (uint256 farCallAbiWithEmptyFatPtr) {
        farCallAbiWithEmptyFatPtr |= (uint256(gasPassed) << 192);
        farCallAbiWithEmptyFatPtr |= (uint256(forwardingMode) << 224);
        farCallAbiWithEmptyFatPtr |= (uint256(shardId) << 232);
        if (isConstructorCall) {
            farCallAbiWithEmptyFatPtr |= (1 << 240);
        }
        if (isSystemCall) {
            farCallAbiWithEmptyFatPtr |= (1 << 248);
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "../openzeppelin/token/ERC20/IERC20.sol";
import "../openzeppelin/token/ERC20/utils/SafeERC20.sol";

import "../interfaces/IPaymasterFlow.sol";
import "../interfaces/IContractDeployer.sol";
import {ETH_TOKEN_SYSTEM_CONTRACT, BOOTLOADER_FORMAL_ADDRESS} from "../Constants.sol";
import "./RLPEncoder.sol";
import "./EfficientCall.sol";

/// @dev The type id of zkSync's EIP-712-signed transaction.
uint8 constant EIP_712_TX_TYPE = 0x71;

/// @dev The type id of legacy transactions.
uint8 constant LEGACY_TX_TYPE = 0x0;
/// @dev The type id of legacy transactions.
uint8 constant EIP_2930_TX_TYPE = 0x01;
/// @dev The type id of EIP1559 transactions.
uint8 constant EIP_1559_TX_TYPE = 0x02;

/// @notice Structure used to represent zkSync transaction.
struct Transaction {
    // The type of the transaction.
    uint256 txType;
    // The caller.
    uint256 from;
    // The callee.
    uint256 to;
    // The gasLimit to pass with the transaction.
    // It has the same meaning as Ethereum's gasLimit.
    uint256 gasLimit;
    // The maximum amount of gas the user is willing to pay for a byte of pubdata.
    uint256 gasPerPubdataByteLimit;
    // The maximum fee per gas that the user is willing to pay.
    // It is akin to EIP1559's maxFeePerGas.
    uint256 maxFeePerGas;
    // The maximum priority fee per gas that the user is willing to pay.
    // It is akin to EIP1559's maxPriorityFeePerGas.
    uint256 maxPriorityFeePerGas;
    // The transaction's paymaster. If there is no paymaster, it is equal to 0.
    uint256 paymaster;
    // The nonce of the transaction.
    uint256 nonce;
    // The value to pass with the transaction.
    uint256 value;
    // In the future, we might want to add some
    // new fields to the struct. The `txData` struct
    // is to be passed to account and any changes to its structure
    // would mean a breaking change to these accounts. In order to prevent this,
    // we should keep some fields as "reserved".
    // It is also recommended that their length is fixed, since
    // it would allow easier proof integration (in case we will need
    // some special circuit for preprocessing transactions).
    uint256[4] reserved;
    // The transaction's calldata.
    bytes data;
    // The signature of the transaction.
    bytes signature;
    // The properly formatted hashes of bytecodes that must be published on L1
    // with the inclusion of this transaction. Note, that a bytecode has been published
    // before, the user won't pay fees for its republishing.
    bytes32[] factoryDeps;
    // The input to the paymaster.
    bytes paymasterInput;
    // Reserved dynamic type for the future use-case. Using it should be avoided,
    // But it is still here, just in case we want to enable some additional functionality.
    bytes reservedDynamic;
}

/**
 * @author Matter Labs
 * @notice Library is used to help custom accounts to work with common methods for the Transaction type.
 */
library TransactionHelper {
    using SafeERC20 for IERC20;

    /// @notice The EIP-712 typehash for the contract's domain
    bytes32 constant EIP712_DOMAIN_TYPEHASH = keccak256("EIP712Domain(string name,string version,uint256 chainId)");

    bytes32 constant EIP712_TRANSACTION_TYPE_HASH =
        keccak256(
            "Transaction(uint256 txType,uint256 from,uint256 to,uint256 gasLimit,uint256 gasPerPubdataByteLimit,uint256 maxFeePerGas,uint256 maxPriorityFeePerGas,uint256 paymaster,uint256 nonce,uint256 value,bytes data,bytes32[] factoryDeps,bytes paymasterInput)"
        );

    /// @notice Whether the token is Ethereum.
    /// @param _addr The address of the token
    /// @return `true` or `false` based on whether the token is Ether.
    /// @dev This method assumes that address is Ether either if the address is 0 (for convenience)
    /// or if the address is the address of the L2EthToken system contract.
    function isEthToken(uint256 _addr) internal pure returns (bool) {
        return _addr == uint256(uint160(address(ETH_TOKEN_SYSTEM_CONTRACT))) || _addr == 0;
    }

    /// @notice Calculate the suggested signed hash of the transaction,
    /// i.e. the hash that is signed by EOAs and is recommended to be signed by other accounts.
    function encodeHash(Transaction calldata _transaction) internal view returns (bytes32 resultHash) {
        if (_transaction.txType == LEGACY_TX_TYPE) {
            resultHash = _encodeHashLegacyTransaction(_transaction);
        } else if (_transaction.txType == EIP_712_TX_TYPE) {
            resultHash = _encodeHashEIP712Transaction(_transaction);
        } else if (_transaction.txType == EIP_1559_TX_TYPE) {
            resultHash = _encodeHashEIP1559Transaction(_transaction);
        } else if (_transaction.txType == EIP_2930_TX_TYPE) {
            resultHash = _encodeHashEIP2930Transaction(_transaction);
        } else {
            // Currently no other transaction types are supported.
            // Any new transaction types will be processed in a similar manner.
            revert("Encoding unsupported tx");
        }
    }

    /// @notice Encode hash of the zkSync native transaction type.
    /// @return keccak256 hash of the EIP-712 encoded representation of transaction
    function _encodeHashEIP712Transaction(Transaction calldata _transaction) private view returns (bytes32) {
        bytes32 structHash = keccak256(
            abi.encode(
                EIP712_TRANSACTION_TYPE_HASH,
                _transaction.txType,
                _transaction.from,
                _transaction.to,
                _transaction.gasLimit,
                _transaction.gasPerPubdataByteLimit,
                _transaction.maxFeePerGas,
                _transaction.maxPriorityFeePerGas,
                _transaction.paymaster,
                _transaction.nonce,
                _transaction.value,
                EfficientCall.keccak(_transaction.data),
                keccak256(abi.encodePacked(_transaction.factoryDeps)),
                EfficientCall.keccak(_transaction.paymasterInput)
            )
        );

        bytes32 domainSeparator = keccak256(
            abi.encode(EIP712_DOMAIN_TYPEHASH, keccak256("zkSync"), keccak256("2"), block.chainid)
        );

        return keccak256(abi.encodePacked("\x19\x01", domainSeparator, structHash));
    }

    /// @notice Encode hash of the legacy transaction type.
    /// @return keccak256 of the serialized RLP encoded representation of transaction
    function _encodeHashLegacyTransaction(Transaction calldata _transaction) private view returns (bytes32) {
        // Hash of legacy transactions are encoded as one of the:
        // - RLP(nonce, gasPrice, gasLimit, to, value, data, chainId, 0, 0)
        // - RLP(nonce, gasPrice, gasLimit, to, value, data)
        //
        // In this RLP encoding, only the first one above list appears, so we encode each element
        // inside list and then concatenate the length of all elements with them.

        bytes memory encodedNonce = RLPEncoder.encodeUint256(_transaction.nonce);
        // Encode `gasPrice` and `gasLimit` together to prevent "stack too deep error".
        bytes memory encodedGasParam;
        {
            bytes memory encodedGasPrice = RLPEncoder.encodeUint256(_transaction.maxFeePerGas);
            bytes memory encodedGasLimit = RLPEncoder.encodeUint256(_transaction.gasLimit);
            encodedGasParam = bytes.concat(encodedGasPrice, encodedGasLimit);
        }

        bytes memory encodedTo = RLPEncoder.encodeAddress(address(uint160(_transaction.to)));
        bytes memory encodedValue = RLPEncoder.encodeUint256(_transaction.value);
        // Encode only the length of the transaction data, and not the data itself,
        // so as not to copy to memory a potentially huge transaction data twice.
        bytes memory encodedDataLength;
        {
            // Safe cast, because the length of the transaction data can't be so large.
            uint64 txDataLen = uint64(_transaction.data.length);
            if (txDataLen != 1) {
                // If the length is not equal to one, then only using the length can it be encoded definitely.
                encodedDataLength = RLPEncoder.encodeNonSingleBytesLen(txDataLen);
            } else if (_transaction.data[0] >= 0x80) {
                // If input is a byte in [0x80, 0xff] range, RLP encoding will concatenates 0x81 with the byte.
                encodedDataLength = hex"81";
            }
            // Otherwise the length is not encoded at all.
        }

        // Encode `chainId` according to EIP-155, but only if the `chainId` is specified in the transaction.
        bytes memory encodedChainId;
        if (_transaction.reserved[0] != 0) {
            encodedChainId = bytes.concat(RLPEncoder.encodeUint256(block.chainid), hex"80_80");
        }

        bytes memory encodedListLength;
        unchecked {
            uint256 listLength = encodedNonce.length +
                encodedGasParam.length +
                encodedTo.length +
                encodedValue.length +
                encodedDataLength.length +
                _transaction.data.length +
                encodedChainId.length;

            // Safe cast, because the length of the list can't be so large.
            encodedListLength = RLPEncoder.encodeListLen(uint64(listLength));
        }

        return
            keccak256(
                bytes.concat(
                    encodedListLength,
                    encodedNonce,
                    encodedGasParam,
                    encodedTo,
                    encodedValue,
                    encodedDataLength,
                    _transaction.data,
                    encodedChainId
                )
            );
    }

    /// @notice Encode hash of the EIP2930 transaction type.
    /// @return keccak256 of the serialized RLP encoded representation of transaction
    function _encodeHashEIP2930Transaction(Transaction calldata _transaction) private view returns (bytes32) {
        // Hash of EIP2930 transactions is encoded the following way:
        // H(0x01 || RLP(chain_id, nonce, gas_price, gas_limit, destination, amount, data, access_list))
        //
        // Note, that on zkSync access lists are not supported and should always be empty.

        // Encode all fixed-length params to avoid "stack too deep error"
        bytes memory encodedFixedLengthParams;
        {
            bytes memory encodedChainId = RLPEncoder.encodeUint256(block.chainid);
            bytes memory encodedNonce = RLPEncoder.encodeUint256(_transaction.nonce);
            bytes memory encodedGasPrice = RLPEncoder.encodeUint256(_transaction.maxFeePerGas);
            bytes memory encodedGasLimit = RLPEncoder.encodeUint256(_transaction.gasLimit);
            bytes memory encodedTo = RLPEncoder.encodeAddress(address(uint160(_transaction.to)));
            bytes memory encodedValue = RLPEncoder.encodeUint256(_transaction.value);
            encodedFixedLengthParams = bytes.concat(
                encodedChainId,
                encodedNonce,
                encodedGasPrice,
                encodedGasLimit,
                encodedTo,
                encodedValue
            );
        }

        // Encode only the length of the transaction data, and not the data itself,
        // so as not to copy to memory a potentially huge transaction data twice.
        bytes memory encodedDataLength;
        {
            // Safe cast, because the length of the transaction data can't be so large.
            uint64 txDataLen = uint64(_transaction.data.length);
            if (txDataLen != 1) {
                // If the length is not equal to one, then only using the length can it be encoded definitely.
                encodedDataLength = RLPEncoder.encodeNonSingleBytesLen(txDataLen);
            } else if (_transaction.data[0] >= 0x80) {
                // If input is a byte in [0x80, 0xff] range, RLP encoding will concatenates 0x81 with the byte.
                encodedDataLength = hex"81";
            }
            // Otherwise the length is not encoded at all.
        }

        // On zkSync, access lists are always zero length (at least for now).
        bytes memory encodedAccessListLength = RLPEncoder.encodeListLen(0);

        bytes memory encodedListLength;
        unchecked {
            uint256 listLength = encodedFixedLengthParams.length +
                encodedDataLength.length +
                _transaction.data.length +
                encodedAccessListLength.length;

            // Safe cast, because the length of the list can't be so large.
            encodedListLength = RLPEncoder.encodeListLen(uint64(listLength));
        }

        return
            keccak256(
                bytes.concat(
                    "\x01",
                    encodedListLength,
                    encodedFixedLengthParams,
                    encodedDataLength,
                    _transaction.data,
                    encodedAccessListLength
                )
            );
    }

    /// @notice Encode hash of the EIP1559 transaction type.
    /// @return keccak256 of the serialized RLP encoded representation of transaction
    function _encodeHashEIP1559Transaction(Transaction calldata _transaction) private view returns (bytes32) {
        // Hash of EIP1559 transactions is encoded the following way:
        // H(0x02 || RLP(chain_id, nonce, max_priority_fee_per_gas, max_fee_per_gas, gas_limit, destination, amount, data, access_list))
        //
        // Note, that on zkSync access lists are not supported and should always be empty.

        // Encode all fixed-length params to avoid "stack too deep error"
        bytes memory encodedFixedLengthParams;
        {
            bytes memory encodedChainId = RLPEncoder.encodeUint256(block.chainid);
            bytes memory encodedNonce = RLPEncoder.encodeUint256(_transaction.nonce);
            bytes memory encodedMaxPriorityFeePerGas = RLPEncoder.encodeUint256(_transaction.maxPriorityFeePerGas);
            bytes memory encodedMaxFeePerGas = RLPEncoder.encodeUint256(_transaction.maxFeePerGas);
            bytes memory encodedGasLimit = RLPEncoder.encodeUint256(_transaction.gasLimit);
            bytes memory encodedTo = RLPEncoder.encodeAddress(address(uint160(_transaction.to)));
            bytes memory encodedValue = RLPEncoder.encodeUint256(_transaction.value);
            encodedFixedLengthParams = bytes.concat(
                encodedChainId,
                encodedNonce,
                encodedMaxPriorityFeePerGas,
                encodedMaxFeePerGas,
                encodedGasLimit,
                encodedTo,
                encodedValue
            );
        }

        // Encode only the length of the transaction data, and not the data itself,
        // so as not to copy to memory a potentially huge transaction data twice.
        bytes memory encodedDataLength;
        {
            // Safe cast, because the length of the transaction data can't be so large.
            uint64 txDataLen = uint64(_transaction.data.length);
            if (txDataLen != 1) {
                // If the length is not equal to one, then only using the length can it be encoded definitely.
                encodedDataLength = RLPEncoder.encodeNonSingleBytesLen(txDataLen);
            } else if (_transaction.data[0] >= 0x80) {
                // If input is a byte in [0x80, 0xff] range, RLP encoding will concatenates 0x81 with the byte.
                encodedDataLength = hex"81";
            }
            // Otherwise the length is not encoded at all.
        }

        // On zkSync, access lists are always zero length (at least for now).
        bytes memory encodedAccessListLength = RLPEncoder.encodeListLen(0);

        bytes memory encodedListLength;
        unchecked {
            uint256 listLength = encodedFixedLengthParams.length +
                encodedDataLength.length +
                _transaction.data.length +
                encodedAccessListLength.length;

            // Safe cast, because the length of the list can't be so large.
            encodedListLength = RLPEncoder.encodeListLen(uint64(listLength));
        }

        return
            keccak256(
                bytes.concat(
                    "\x02",
                    encodedListLength,
                    encodedFixedLengthParams,
                    encodedDataLength,
                    _transaction.data,
                    encodedAccessListLength
                )
            );
    }

    /// @notice Processes the common paymaster flows, e.g. setting proper allowance
    /// for tokens, etc. For more information on the expected behavior, check out
    /// the "Paymaster flows" section in the documentation.
    function processPaymasterInput(Transaction calldata _transaction) internal {
        require(_transaction.paymasterInput.length >= 4, "The standard paymaster input must be at least 4 bytes long");

        bytes4 paymasterInputSelector = bytes4(_transaction.paymasterInput[0:4]);
        if (paymasterInputSelector == IPaymasterFlow.approvalBased.selector) {
            require(
                _transaction.paymasterInput.length >= 68,
                "The approvalBased paymaster input must be at least 68 bytes long"
            );

            // While the actual data consists of address, uint256 and bytes data,
            // the data is needed only for the paymaster, so we ignore it here for the sake of optimization
            (address token, uint256 minAllowance) = abi.decode(_transaction.paymasterInput[4:68], (address, uint256));
            address paymaster = address(uint160(_transaction.paymaster));

            uint256 currentAllowance = IERC20(token).allowance(address(this), paymaster);
            if (currentAllowance < minAllowance) {
                // Some tokens, e.g. USDT require that the allowance is firsty set to zero
                // and only then updated to the new value.

                IERC20(token).safeApprove(paymaster, 0);
                IERC20(token).safeApprove(paymaster, minAllowance);
            }
        } else if (paymasterInputSelector == IPaymasterFlow.general.selector) {
            // Do nothing. general(bytes) paymaster flow means that the paymaster must interpret these bytes on his own.
        } else {
            revert("Unsupported paymaster flow");
        }
    }

    /// @notice Pays the required fee for the transaction to the bootloader.
    /// @dev Currently it pays the maximum amount "_transaction.maxFeePerGas * _transaction.gasLimit",
    /// it will change in the future.
    function payToTheBootloader(Transaction calldata _transaction) internal returns (bool success) {
        address bootloaderAddr = BOOTLOADER_FORMAL_ADDRESS;
        uint256 amount = _transaction.maxFeePerGas * _transaction.gasLimit;

        assembly {
            success := call(gas(), bootloaderAddr, amount, 0, 0, 0, 0)
        }
    }

    // Returns the balance required to process the transaction.
    function totalRequiredBalance(Transaction calldata _transaction) internal pure returns (uint256 requiredBalance) {
        if (address(uint160(_transaction.paymaster)) != address(0)) {
            // Paymaster pays for the fee
            requiredBalance = _transaction.value;
        } else {
            // The user should have enough balance for both the fee and the value of the transaction
            requiredBalance = _transaction.maxFeePerGas * _transaction.gasLimit + _transaction.value;
        }
    }
}

// SPDX-License-Identifier: MIT
pragma solidity >=0.8.0;

import "./EfficientCall.sol";

/**
 * @author Matter Labs
 * @dev Common utilities used in zkSync system contracts
 */
library Utils {
    /// @dev Bit mask of bytecode hash "isConstructor" marker
    bytes32 constant IS_CONSTRUCTOR_BYTECODE_HASH_BIT_MASK =
        0x00ff000000000000000000000000000000000000000000000000000000000000;

    /// @dev Bit mask to set the "isConstructor" marker in the bytecode hash
    bytes32 constant SET_IS_CONSTRUCTOR_MARKER_BIT_MASK =
        0x0001000000000000000000000000000000000000000000000000000000000000;

    function safeCastToU128(uint256 _x) internal pure returns (uint128) {
        require(_x <= type(uint128).max, "Overflow");

        return uint128(_x);
    }

    function safeCastToU32(uint256 _x) internal pure returns (uint32) {
        require(_x <= type(uint32).max, "Overflow");

        return uint32(_x);
    }

    function safeCastToU24(uint256 _x) internal pure returns (uint24) {
        require(_x <= type(uint24).max, "Overflow");

        return uint24(_x);
    }

    /// @return codeLength The bytecode length in bytes
    function bytecodeLenInBytes(bytes32 _bytecodeHash) internal pure returns (uint256 codeLength) {
        codeLength = bytecodeLenInWords(_bytecodeHash) << 5; // _bytecodeHash * 32
    }

    /// @return codeLengthInWords The bytecode length in machine words
    function bytecodeLenInWords(bytes32 _bytecodeHash) internal pure returns (uint256 codeLengthInWords) {
        unchecked {
            codeLengthInWords = uint256(uint8(_bytecodeHash[2])) * 256 + uint256(uint8(_bytecodeHash[3]));
        }
    }

    /// @notice Denotes whether bytecode hash corresponds to a contract that already constructed
    function isContractConstructed(bytes32 _bytecodeHash) internal pure returns (bool) {
        return _bytecodeHash[1] == 0x00;
    }

    /// @notice Denotes whether bytecode hash corresponds to a contract that is on constructor or has already been constructed
    function isContractConstructing(bytes32 _bytecodeHash) internal pure returns (bool) {
        return _bytecodeHash[1] == 0x01;
    }

    /// @notice Sets "isConstructor" flag to TRUE for the bytecode hash
    /// @param _bytecodeHash The bytecode hash for which it is needed to set the constructing flag
    /// @return The bytecode hash with "isConstructor" flag set to TRUE
    function constructingBytecodeHash(bytes32 _bytecodeHash) internal pure returns (bytes32) {
        // Clear the "isConstructor" marker and set it to 0x01.
        return constructedBytecodeHash(_bytecodeHash) | SET_IS_CONSTRUCTOR_MARKER_BIT_MASK;
    }

    /// @notice Sets "isConstructor" flag to FALSE for the bytecode hash
    /// @param _bytecodeHash The bytecode hash for which it is needed to set the constructing flag
    /// @return The bytecode hash with "isConstructor" flag set to FALSE
    function constructedBytecodeHash(bytes32 _bytecodeHash) internal pure returns (bytes32) {
        return _bytecodeHash & ~IS_CONSTRUCTOR_BYTECODE_HASH_BIT_MASK;
    }

    /// @notice Validate the bytecode format and calculate its hash.
    /// @param _bytecode The bytecode to hash.
    /// @return hashedBytecode The 32-byte hash of the bytecode.
    /// Note: The function reverts the execution if the bytecode has non expected format:
    /// - Bytecode bytes length is not a multiple of 32
    /// - Bytecode bytes length is not less than 2^21 bytes (2^16 words)
    /// - Bytecode words length is not odd
    function hashL2Bytecode(bytes calldata _bytecode) internal view returns (bytes32 hashedBytecode) {
        // Note that the length of the bytecode must be provided in 32-byte words.
        require(_bytecode.length % 32 == 0, "po");

        uint256 bytecodeLenInWords = _bytecode.length / 32;
        require(bytecodeLenInWords < 2 ** 16, "pp"); // bytecode length must be less than 2^16 words
        require(bytecodeLenInWords % 2 == 1, "pr"); // bytecode length in words must be odd
        hashedBytecode =
            EfficientCall.sha(_bytecode) &
            0x00000000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF;
        // Setting the version of the hash
        hashedBytecode = (hashedBytecode | bytes32(uint256(1 << 248)));
        // Setting the length
        hashedBytecode = hashedBytecode | bytes32(bytecodeLenInWords << 224);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Permit.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);

    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.0;

import "../IERC20.sol";
import "../extensions/IERC20Permit.sol";
import "../../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    function safeTransfer(
        IERC20 token,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(
            token,
            abi.encodeWithSelector(token.transfer.selector, to, value)
        );
    }

    function safeTransferFrom(
        IERC20 token,
        address from,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(
            token,
            abi.encodeWithSelector(token.transferFrom.selector, from, to, value)
        );
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(
            token,
            abi.encodeWithSelector(token.approve.selector, spender, value)
        );
    }

    function safeIncreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        uint256 newAllowance = token.allowance(address(this), spender) + value;
        _callOptionalReturn(
            token,
            abi.encodeWithSelector(
                token.approve.selector,
                spender,
                newAllowance
            )
        );
    }

    function safeDecreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        unchecked {
            uint256 oldAllowance = token.allowance(address(this), spender);
            require(
                oldAllowance >= value,
                "SafeERC20: decreased allowance below zero"
            );
            uint256 newAllowance = oldAllowance - value;
            _callOptionalReturn(
                token,
                abi.encodeWithSelector(
                    token.approve.selector,
                    spender,
                    newAllowance
                )
            );
        }
    }

    function safePermit(
        IERC20Permit token,
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        uint256 nonceBefore = token.nonces(owner);
        token.permit(owner, spender, value, deadline, v, r, s);
        uint256 nonceAfter = token.nonces(owner);
        require(
            nonceAfter == nonceBefore + 1,
            "SafeERC20: permit did not succeed"
        );
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(
            data,
            "SafeERC20: low-level call failed"
        );
        if (returndata.length > 0) {
            // Return data is optional
            require(
                abi.decode(returndata, (bool)),
                "SafeERC20: ERC20 operation did not succeed"
            );
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(
            address(this).balance >= amount,
            "Address: insufficient balance"
        );

        (bool success, ) = recipient.call{value: amount}("");
        require(
            success,
            "Address: unable to send value, recipient may have reverted"
        );
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data)
        internal
        returns (bytes memory)
    {
        return
            functionCallWithValue(
                target,
                data,
                0,
                "Address: low-level call failed"
            );
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return
            functionCallWithValue(
                target,
                data,
                value,
                "Address: low-level call with value failed"
            );
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(
            address(this).balance >= value,
            "Address: insufficient balance for call"
        );
        (bool success, bytes memory returndata) = target.call{value: value}(
            data
        );
        return
            verifyCallResultFromTarget(
                target,
                success,
                returndata,
                errorMessage
            );
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data)
        internal
        view
        returns (bytes memory)
    {
        return
            functionStaticCall(
                target,
                data,
                "Address: low-level static call failed"
            );
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return
            verifyCallResultFromTarget(
                target,
                success,
                returndata,
                errorMessage
            );
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data)
        internal
        returns (bytes memory)
    {
        return
            functionDelegateCall(
                target,
                data,
                "Address: low-level delegate call failed"
            );
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return
            verifyCallResultFromTarget(
                target,
                success,
                returndata,
                errorMessage
            );
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
     * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
     *
     * _Available since v4.8._
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        if (success) {
            if (returndata.length == 0) {
                // only check isContract if the call was successful and the return data is empty
                // otherwise we already know that it was a contract
                require(isContract(target), "Address: call to non-contract");
            }
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason or using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    function _revert(bytes memory returndata, string memory errorMessage)
        private
        pure
    {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert(errorMessage);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (access/Ownable.sol)

pragma solidity ^0.8.0;

import "../utils/Context.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby disabling any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (interfaces/IERC5267.sol)

pragma solidity ^0.8.0;

interface IERC5267 {
    /**
     * @dev MAY be emitted to signal that the domain could have changed.
     */
    event EIP712DomainChanged();

    /**
     * @dev returns the fields and values that describe the domain separator used by this contract for EIP-712
     * signature.
     */
    function eip712Domain()
        external
        view
        returns (
            bytes1 fields,
            string memory name,
            string memory version,
            uint256 chainId,
            address verifyingContract,
            bytes32 salt,
            uint256[] memory extensions
        );
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 amount) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/ShortStrings.sol)

pragma solidity ^0.8.8;

import "./StorageSlot.sol";

// | string  | 0xAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA   |
// | length  | 0x                                                              BB |
type ShortString is bytes32;

/**
 * @dev This library provides functions to convert short memory strings
 * into a `ShortString` type that can be used as an immutable variable.
 *
 * Strings of arbitrary length can be optimized using this library if
 * they are short enough (up to 31 bytes) by packing them with their
 * length (1 byte) in a single EVM word (32 bytes). Additionally, a
 * fallback mechanism can be used for every other case.
 *
 * Usage example:
 *
 * ```solidity
 * contract Named {
 *     using ShortStrings for *;
 *
 *     ShortString private immutable _name;
 *     string private _nameFallback;
 *
 *     constructor(string memory contractName) {
 *         _name = contractName.toShortStringWithFallback(_nameFallback);
 *     }
 *
 *     function name() external view returns (string memory) {
 *         return _name.toStringWithFallback(_nameFallback);
 *     }
 * }
 * ```
 */
library ShortStrings {
    // Used as an identifier for strings longer than 31 bytes.
    bytes32 private constant _FALLBACK_SENTINEL = 0x00000000000000000000000000000000000000000000000000000000000000FF;

    error StringTooLong(string str);
    error InvalidShortString();

    /**
     * @dev Encode a string of at most 31 chars into a `ShortString`.
     *
     * This will trigger a `StringTooLong` error is the input string is too long.
     */
    function toShortString(string memory str) internal pure returns (ShortString) {
        bytes memory bstr = bytes(str);
        if (bstr.length > 31) {
            revert StringTooLong(str);
        }
        return ShortString.wrap(bytes32(uint256(bytes32(bstr)) | bstr.length));
    }

    /**
     * @dev Decode a `ShortString` back to a "normal" string.
     */
    function toString(ShortString sstr) internal pure returns (string memory) {
        uint256 len = byteLength(sstr);
        // using `new string(len)` would work locally but is not memory safe.
        string memory str = new string(32);
        /// @solidity memory-safe-assembly
        assembly {
            mstore(str, len)
            mstore(add(str, 0x20), sstr)
        }
        return str;
    }

    /**
     * @dev Return the length of a `ShortString`.
     */
    function byteLength(ShortString sstr) internal pure returns (uint256) {
        uint256 result = uint256(ShortString.unwrap(sstr)) & 0xFF;
        if (result > 31) {
            revert InvalidShortString();
        }
        return result;
    }

    /**
     * @dev Encode a string into a `ShortString`, or write it to storage if it is too long.
     */
    function toShortStringWithFallback(string memory value, string storage store) internal returns (ShortString) {
        if (bytes(value).length < 32) {
            return toShortString(value);
        } else {
            StorageSlot.getStringSlot(store).value = value;
            return ShortString.wrap(_FALLBACK_SENTINEL);
        }
    }

    /**
     * @dev Decode a string that was encoded to `ShortString` or written to storage using {setWithFallback}.
     */
    function toStringWithFallback(ShortString value, string storage store) internal pure returns (string memory) {
        if (ShortString.unwrap(value) != _FALLBACK_SENTINEL) {
            return toString(value);
        } else {
            return store;
        }
    }

    /**
     * @dev Return the length of a string that was encoded to `ShortString` or written to storage using {setWithFallback}.
     *
     * WARNING: This will return the "byte length" of the string. This may not reflect the actual length in terms of
     * actual characters as the UTF-8 encoding of a single character can span over multiple bytes.
     */
    function byteLengthWithFallback(ShortString value, string storage store) internal view returns (uint256) {
        if (ShortString.unwrap(value) != _FALLBACK_SENTINEL) {
            return byteLength(value);
        } else {
            return bytes(store).length;
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/StorageSlot.sol)
// This file was procedurally generated from scripts/generate/templates/StorageSlot.js.

pragma solidity ^0.8.0;

/**
 * @dev Library for reading and writing primitive types to specific storage slots.
 *
 * Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.
 * This library helps with reading and writing to such slots without the need for inline assembly.
 *
 * The functions in this library return Slot structs that contain a `value` member that can be used to read or write.
 *
 * Example usage to set ERC1967 implementation slot:
 * ```solidity
 * contract ERC1967 {
 *     bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
 *
 *     function _getImplementation() internal view returns (address) {
 *         return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
 *     }
 *
 *     function _setImplementation(address newImplementation) internal {
 *         require(Address.isContract(newImplementation), "ERC1967: new implementation is not a contract");
 *         StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
 *     }
 * }
 * ```
 *
 * _Available since v4.1 for `address`, `bool`, `bytes32`, `uint256`._
 * _Available since v4.9 for `string`, `bytes`._
 */
library StorageSlot {
    struct AddressSlot {
        address value;
    }

    struct BooleanSlot {
        bool value;
    }

    struct Bytes32Slot {
        bytes32 value;
    }

    struct Uint256Slot {
        uint256 value;
    }

    struct StringSlot {
        string value;
    }

    struct BytesSlot {
        bytes value;
    }

    /**
     * @dev Returns an `AddressSlot` with member `value` located at `slot`.
     */
    function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `BooleanSlot` with member `value` located at `slot`.
     */
    function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `Bytes32Slot` with member `value` located at `slot`.
     */
    function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `Uint256Slot` with member `value` located at `slot`.
     */
    function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `StringSlot` with member `value` located at `slot`.
     */
    function getStringSlot(bytes32 slot) internal pure returns (StringSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `StringSlot` representation of the string storage pointer `store`.
     */
    function getStringSlot(string storage store) internal pure returns (StringSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := store.slot
        }
    }

    /**
     * @dev Returns an `BytesSlot` with member `value` located at `slot`.
     */
    function getBytesSlot(bytes32 slot) internal pure returns (BytesSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `BytesSlot` representation of the bytes storage pointer `store`.
     */
    function getBytesSlot(bytes storage store) internal pure returns (BytesSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := store.slot
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/Strings.sol)

pragma solidity ^0.8.0;

import "./math/Math.sol";
import "./math/SignedMath.sol";

/**
 * @dev String operations.
 */
library Strings {
    bytes16 private constant _SYMBOLS = "0123456789abcdef";
    uint8 private constant _ADDRESS_LENGTH = 20;

    /**
     * @dev Converts a `uint256` to its ASCII `string` decimal representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        unchecked {
            uint256 length = Math.log10(value) + 1;
            string memory buffer = new string(length);
            uint256 ptr;
            /// @solidity memory-safe-assembly
            assembly {
                ptr := add(buffer, add(32, length))
            }
            while (true) {
                ptr--;
                /// @solidity memory-safe-assembly
                assembly {
                    mstore8(ptr, byte(mod(value, 10), _SYMBOLS))
                }
                value /= 10;
                if (value == 0) break;
            }
            return buffer;
        }
    }

    /**
     * @dev Converts a `int256` to its ASCII `string` decimal representation.
     */
    function toString(int256 value) internal pure returns (string memory) {
        return string(abi.encodePacked(value < 0 ? "-" : "", toString(SignedMath.abs(value))));
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
     */
    function toHexString(uint256 value) internal pure returns (string memory) {
        unchecked {
            return toHexString(value, Math.log256(value) + 1);
        }
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
     */
    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
        bytes memory buffer = new bytes(2 * length + 2);
        buffer[0] = "0";
        buffer[1] = "x";
        for (uint256 i = 2 * length + 1; i > 1; --i) {
            buffer[i] = _SYMBOLS[value & 0xf];
            value >>= 4;
        }
        require(value == 0, "Strings: hex length insufficient");
        return string(buffer);
    }

    /**
     * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal representation.
     */
    function toHexString(address addr) internal pure returns (string memory) {
        return toHexString(uint256(uint160(addr)), _ADDRESS_LENGTH);
    }

    /**
     * @dev Returns true if the two strings are equal.
     */
    function equal(string memory a, string memory b) internal pure returns (bool) {
        return keccak256(bytes(a)) == keccak256(bytes(b));
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/cryptography/ECDSA.sol)

pragma solidity ^0.8.0;

import "../Strings.sol";

/**
 * @dev Elliptic Curve Digital Signature Algorithm (ECDSA) operations.
 *
 * These functions can be used to verify that a message was signed by the holder
 * of the private keys of a given address.
 */
library ECDSA {
    enum RecoverError {
        NoError,
        InvalidSignature,
        InvalidSignatureLength,
        InvalidSignatureS,
        InvalidSignatureV // Deprecated in v4.8
    }

    function _throwError(RecoverError error) private pure {
        if (error == RecoverError.NoError) {
            return; // no error: do nothing
        } else if (error == RecoverError.InvalidSignature) {
            revert("ECDSA: invalid signature");
        } else if (error == RecoverError.InvalidSignatureLength) {
            revert("ECDSA: invalid signature length");
        } else if (error == RecoverError.InvalidSignatureS) {
            revert("ECDSA: invalid signature 's' value");
        }
    }

    /**
     * @dev Returns the address that signed a hashed message (`hash`) with
     * `signature` or error string. This address can then be used for verification purposes.
     *
     * The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
     * this function rejects them by requiring the `s` value to be in the lower
     * half order, and the `v` value to be either 27 or 28.
     *
     * IMPORTANT: `hash` _must_ be the result of a hash operation for the
     * verification to be secure: it is possible to craft signatures that
     * recover to arbitrary addresses for non-hashed data. A safe way to ensure
     * this is by receiving a hash of the original message (which may otherwise
     * be too long), and then calling {toEthSignedMessageHash} on it.
     *
     * Documentation for signature generation:
     * - with https://web3js.readthedocs.io/en/v1.3.4/web3-eth-accounts.html#sign[Web3.js]
     * - with https://docs.ethers.io/v5/api/signer/#Signer-signMessage[ethers]
     *
     * _Available since v4.3._
     */
    function tryRecover(bytes32 hash, bytes memory signature) internal pure returns (address, RecoverError) {
        if (signature.length == 65) {
            bytes32 r;
            bytes32 s;
            uint8 v;
            // ecrecover takes the signature parameters, and the only way to get them
            // currently is to use assembly.
            /// @solidity memory-safe-assembly
            assembly {
                r := mload(add(signature, 0x20))
                s := mload(add(signature, 0x40))
                v := byte(0, mload(add(signature, 0x60)))
            }
            return tryRecover(hash, v, r, s);
        } else {
            return (address(0), RecoverError.InvalidSignatureLength);
        }
    }

    /**
     * @dev Returns the address that signed a hashed message (`hash`) with
     * `signature`. This address can then be used for verification purposes.
     *
     * The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
     * this function rejects them by requiring the `s` value to be in the lower
     * half order, and the `v` value to be either 27 or 28.
     *
     * IMPORTANT: `hash` _must_ be the result of a hash operation for the
     * verification to be secure: it is possible to craft signatures that
     * recover to arbitrary addresses for non-hashed data. A safe way to ensure
     * this is by receiving a hash of the original message (which may otherwise
     * be too long), and then calling {toEthSignedMessageHash} on it.
     */
    function recover(bytes32 hash, bytes memory signature) internal pure returns (address) {
        (address recovered, RecoverError error) = tryRecover(hash, signature);
        _throwError(error);
        return recovered;
    }

    /**
     * @dev Overload of {ECDSA-tryRecover} that receives the `r` and `vs` short-signature fields separately.
     *
     * See https://eips.ethereum.org/EIPS/eip-2098[EIP-2098 short signatures]
     *
     * _Available since v4.3._
     */
    function tryRecover(bytes32 hash, bytes32 r, bytes32 vs) internal pure returns (address, RecoverError) {
        bytes32 s = vs & bytes32(0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff);
        uint8 v = uint8((uint256(vs) >> 255) + 27);
        return tryRecover(hash, v, r, s);
    }

    /**
     * @dev Overload of {ECDSA-recover} that receives the `r and `vs` short-signature fields separately.
     *
     * _Available since v4.2._
     */
    function recover(bytes32 hash, bytes32 r, bytes32 vs) internal pure returns (address) {
        (address recovered, RecoverError error) = tryRecover(hash, r, vs);
        _throwError(error);
        return recovered;
    }

    /**
     * @dev Overload of {ECDSA-tryRecover} that receives the `v`,
     * `r` and `s` signature fields separately.
     *
     * _Available since v4.3._
     */
    function tryRecover(bytes32 hash, uint8 v, bytes32 r, bytes32 s) internal pure returns (address, RecoverError) {
        // EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature
        // unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines
        // the valid range for s in (301): 0 < s < secp256k1n ÷ 2 + 1, and for v in (302): v ∈ {27, 28}. Most
        // signatures from current libraries generate a unique signature with an s-value in the lower half order.
        //
        // If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value
        // with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or
        // vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept
        // these malleable signatures as well.
        if (uint256(s) > 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0) {
            return (address(0), RecoverError.InvalidSignatureS);
        }

        // If the signature is valid (and not malleable), return the signer address
        address signer = ecrecover(hash, v, r, s);
        if (signer == address(0)) {
            return (address(0), RecoverError.InvalidSignature);
        }

        return (signer, RecoverError.NoError);
    }

    /**
     * @dev Overload of {ECDSA-recover} that receives the `v`,
     * `r` and `s` signature fields separately.
     */
    function recover(bytes32 hash, uint8 v, bytes32 r, bytes32 s) internal pure returns (address) {
        (address recovered, RecoverError error) = tryRecover(hash, v, r, s);
        _throwError(error);
        return recovered;
    }

    /**
     * @dev Returns an Ethereum Signed Message, created from a `hash`. This
     * produces hash corresponding to the one signed with the
     * https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]
     * JSON-RPC method as part of EIP-191.
     *
     * See {recover}.
     */
    function toEthSignedMessageHash(bytes32 hash) internal pure returns (bytes32 message) {
        // 32 is the length in bytes of hash,
        // enforced by the type signature above
        /// @solidity memory-safe-assembly
        assembly {
            mstore(0x00, "\x19Ethereum Signed Message:\n32")
            mstore(0x1c, hash)
            message := keccak256(0x00, 0x3c)
        }
    }

    /**
     * @dev Returns an Ethereum Signed Message, created from `s`. This
     * produces hash corresponding to the one signed with the
     * https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]
     * JSON-RPC method as part of EIP-191.
     *
     * See {recover}.
     */
    function toEthSignedMessageHash(bytes memory s) internal pure returns (bytes32) {
        return keccak256(abi.encodePacked("\x19Ethereum Signed Message:\n", Strings.toString(s.length), s));
    }

    /**
     * @dev Returns an Ethereum Signed Typed Data, created from a
     * `domainSeparator` and a `structHash`. This produces hash corresponding
     * to the one signed with the
     * https://eips.ethereum.org/EIPS/eip-712[`eth_signTypedData`]
     * JSON-RPC method as part of EIP-712.
     *
     * See {recover}.
     */
    function toTypedDataHash(bytes32 domainSeparator, bytes32 structHash) internal pure returns (bytes32 data) {
        /// @solidity memory-safe-assembly
        assembly {
            let ptr := mload(0x40)
            mstore(ptr, "\x19\x01")
            mstore(add(ptr, 0x02), domainSeparator)
            mstore(add(ptr, 0x22), structHash)
            data := keccak256(ptr, 0x42)
        }
    }

    /**
     * @dev Returns an Ethereum Signed Data with intended validator, created from a
     * `validator` and `data` according to the version 0 of EIP-191.
     *
     * See {recover}.
     */
    function toDataWithIntendedValidatorHash(address validator, bytes memory data) internal pure returns (bytes32) {
        return keccak256(abi.encodePacked("\x19\x00", validator, data));
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/cryptography/EIP712.sol)

pragma solidity ^0.8.8;

import "./ECDSA.sol";
import "../ShortStrings.sol";
import "../../interfaces/IERC5267.sol";

/**
 * @dev https://eips.ethereum.org/EIPS/eip-712[EIP 712] is a standard for hashing and signing of typed structured data.
 *
 * The encoding specified in the EIP is very generic, and such a generic implementation in Solidity is not feasible,
 * thus this contract does not implement the encoding itself. Protocols need to implement the type-specific encoding
 * they need in their contracts using a combination of `abi.encode` and `keccak256`.
 *
 * This contract implements the EIP 712 domain separator ({_domainSeparatorV4}) that is used as part of the encoding
 * scheme, and the final step of the encoding to obtain the message digest that is then signed via ECDSA
 * ({_hashTypedDataV4}).
 *
 * The implementation of the domain separator was designed to be as efficient as possible while still properly updating
 * the chain id to protect against replay attacks on an eventual fork of the chain.
 *
 * NOTE: This contract implements the version of the encoding known as "v4", as implemented by the JSON RPC method
 * https://docs.metamask.io/guide/signing-data.html[`eth_signTypedDataV4` in MetaMask].
 *
 * NOTE: In the upgradeable version of this contract, the cached values will correspond to the address, and the domain
 * separator of the implementation contract. This will cause the `_domainSeparatorV4` function to always rebuild the
 * separator from the immutable values, which is cheaper than accessing a cached version in cold storage.
 *
 * _Available since v3.4._
 *
 * @custom:oz-upgrades-unsafe-allow state-variable-immutable state-variable-assignment
 */
abstract contract EIP712 is IERC5267 {
    using ShortStrings for *;

    bytes32 private constant _TYPE_HASH =
        keccak256("EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)");

    // Cache the domain separator as an immutable value, but also store the chain id that it corresponds to, in order to
    // invalidate the cached domain separator if the chain id changes.
    bytes32 private immutable _cachedDomainSeparator;
    uint256 private immutable _cachedChainId;
    address private immutable _cachedThis;

    bytes32 private immutable _hashedName;
    bytes32 private immutable _hashedVersion;

    ShortString private immutable _name;
    ShortString private immutable _version;
    string private _nameFallback;
    string private _versionFallback;

    /**
     * @dev Initializes the domain separator and parameter caches.
     *
     * The meaning of `name` and `version` is specified in
     * https://eips.ethereum.org/EIPS/eip-712#definition-of-domainseparator[EIP 712]:
     *
     * - `name`: the user readable name of the signing domain, i.e. the name of the DApp or the protocol.
     * - `version`: the current major version of the signing domain.
     *
     * NOTE: These parameters cannot be changed except through a xref:learn::upgrading-smart-contracts.adoc[smart
     * contract upgrade].
     */
    constructor(string memory name, string memory version) {
        _name = name.toShortStringWithFallback(_nameFallback);
        _version = version.toShortStringWithFallback(_versionFallback);
        _hashedName = keccak256(bytes(name));
        _hashedVersion = keccak256(bytes(version));

        _cachedChainId = block.chainid;
        _cachedDomainSeparator = _buildDomainSeparator();
        _cachedThis = address(this);
    }

    /**
     * @dev Returns the domain separator for the current chain.
     */
    function _domainSeparatorV4() internal view returns (bytes32) {
        if (address(this) == _cachedThis && block.chainid == _cachedChainId) {
            return _cachedDomainSeparator;
        } else {
            return _buildDomainSeparator();
        }
    }

    function _buildDomainSeparator() private view returns (bytes32) {
        return keccak256(abi.encode(_TYPE_HASH, _hashedName, _hashedVersion, block.chainid, address(this)));
    }

    /**
     * @dev Given an already https://eips.ethereum.org/EIPS/eip-712#definition-of-hashstruct[hashed struct], this
     * function returns the hash of the fully encoded EIP712 message for this domain.
     *
     * This hash can be used together with {ECDSA-recover} to obtain the signer of a message. For example:
     *
     * ```solidity
     * bytes32 digest = _hashTypedDataV4(keccak256(abi.encode(
     *     keccak256("Mail(address to,string contents)"),
     *     mailTo,
     *     keccak256(bytes(mailContents))
     * )));
     * address signer = ECDSA.recover(digest, signature);
     * ```
     */
    function _hashTypedDataV4(bytes32 structHash) internal view virtual returns (bytes32) {
        return ECDSA.toTypedDataHash(_domainSeparatorV4(), structHash);
    }

    /**
     * @dev See {EIP-5267}.
     *
     * _Available since v4.9._
     */
    function eip712Domain()
        public
        view
        virtual
        override
        returns (
            bytes1 fields,
            string memory name,
            string memory version,
            uint256 chainId,
            address verifyingContract,
            bytes32 salt,
            uint256[] memory extensions
        )
    {
        return (
            hex"0f", // 01111
            _name.toStringWithFallback(_nameFallback),
            _version.toStringWithFallback(_versionFallback),
            block.chainid,
            address(this),
            bytes32(0),
            new uint256[](0)
        );
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/math/Math.sol)

pragma solidity ^0.8.0;

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    enum Rounding {
        Down, // Toward negative infinity
        Up, // Toward infinity
        Zero // Toward zero
    }

    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow.
        return (a & b) + (a ^ b) / 2;
    }

    /**
     * @dev Returns the ceiling of the division of two numbers.
     *
     * This differs from standard division with `/` in that it rounds up instead
     * of rounding down.
     */
    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b - 1) / b can overflow on addition, so we distribute.
        return a == 0 ? 0 : (a - 1) / b + 1;
    }

    /**
     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or denominator == 0
     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv)
     * with further edits by Uniswap Labs also under MIT license.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator) internal pure returns (uint256 result) {
        unchecked {
            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
            // variables such that product = prod1 * 2^256 + prod0.
            uint256 prod0; // Least significant 256 bits of the product
            uint256 prod1; // Most significant 256 bits of the product
            assembly {
                let mm := mulmod(x, y, not(0))
                prod0 := mul(x, y)
                prod1 := sub(sub(mm, prod0), lt(mm, prod0))
            }

            // Handle non-overflow cases, 256 by 256 division.
            if (prod1 == 0) {
                // Solidity will revert if denominator == 0, unlike the div opcode on its own.
                // The surrounding unchecked block does not change this fact.
                // See https://docs.soliditylang.org/en/latest/control-structures.html#checked-or-unchecked-arithmetic.
                return prod0 / denominator;
            }

            // Make sure the result is less than 2^256. Also prevents denominator == 0.
            require(denominator > prod1, "Math: mulDiv overflow");

            ///////////////////////////////////////////////
            // 512 by 256 division.
            ///////////////////////////////////////////////

            // Make division exact by subtracting the remainder from [prod1 prod0].
            uint256 remainder;
            assembly {
                // Compute remainder using mulmod.
                remainder := mulmod(x, y, denominator)

                // Subtract 256 bit number from 512 bit number.
                prod1 := sub(prod1, gt(remainder, prod0))
                prod0 := sub(prod0, remainder)
            }

            // Factor powers of two out of denominator and compute largest power of two divisor of denominator. Always >= 1.
            // See https://cs.stackexchange.com/q/138556/92363.

            // Does not overflow because the denominator cannot be zero at this stage in the function.
            uint256 twos = denominator & (~denominator + 1);
            assembly {
                // Divide denominator by twos.
                denominator := div(denominator, twos)

                // Divide [prod1 prod0] by twos.
                prod0 := div(prod0, twos)

                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
                twos := add(div(sub(0, twos), twos), 1)
            }

            // Shift in bits from prod1 into prod0.
            prod0 |= prod1 * twos;

            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
            // four bits. That is, denominator * inv = 1 mod 2^4.
            uint256 inverse = (3 * denominator) ^ 2;

            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also works
            // in modular arithmetic, doubling the correct bits in each step.
            inverse *= 2 - denominator * inverse; // inverse mod 2^8
            inverse *= 2 - denominator * inverse; // inverse mod 2^16
            inverse *= 2 - denominator * inverse; // inverse mod 2^32
            inverse *= 2 - denominator * inverse; // inverse mod 2^64
            inverse *= 2 - denominator * inverse; // inverse mod 2^128
            inverse *= 2 - denominator * inverse; // inverse mod 2^256

            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
            // is no longer required.
            result = prod0 * inverse;
            return result;
        }
    }

    /**
     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internal pure returns (uint256) {
        uint256 result = mulDiv(x, y, denominator);
        if (rounding == Rounding.Up && mulmod(x, y, denominator) > 0) {
            result += 1;
        }
        return result;
    }

    /**
     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded down.
     *
     * Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
     */
    function sqrt(uint256 a) internal pure returns (uint256) {
        if (a == 0) {
            return 0;
        }

        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
        //
        // We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
        // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.
        //
        // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`
        // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`
        // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`
        //
        // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.
        uint256 result = 1 << (log2(a) >> 1);

        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
        // into the expected uint128 result.
        unchecked {
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            return min(result, a / result);
        }
    }

    /**
     * @notice Calculates sqrt(a), following the selected rounding direction.
     */
    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = sqrt(a);
            return result + (rounding == Rounding.Up && result * result < a ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 2, rounded down, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 128;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 64;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 32;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 16;
            }
            if (value >> 8 > 0) {
                value >>= 8;
                result += 8;
            }
            if (value >> 4 > 0) {
                value >>= 4;
                result += 4;
            }
            if (value >> 2 > 0) {
                value >>= 2;
                result += 2;
            }
            if (value >> 1 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log2(value);
            return result + (rounding == Rounding.Up && 1 << result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 10, rounded down, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >= 10 ** 64) {
                value /= 10 ** 64;
                result += 64;
            }
            if (value >= 10 ** 32) {
                value /= 10 ** 32;
                result += 32;
            }
            if (value >= 10 ** 16) {
                value /= 10 ** 16;
                result += 16;
            }
            if (value >= 10 ** 8) {
                value /= 10 ** 8;
                result += 8;
            }
            if (value >= 10 ** 4) {
                value /= 10 ** 4;
                result += 4;
            }
            if (value >= 10 ** 2) {
                value /= 10 ** 2;
                result += 2;
            }
            if (value >= 10 ** 1) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log10(value);
            return result + (rounding == Rounding.Up && 10 ** result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 256, rounded down, of a positive value.
     * Returns 0 if given 0.
     *
     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
     */
    function log256(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 16;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 8;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 4;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 2;
            }
            if (value >> 8 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 256, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log256(value);
            return result + (rounding == Rounding.Up && 1 << (result << 3) < value ? 1 : 0);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/math/SignedMath.sol)

pragma solidity ^0.8.0;

/**
 * @dev Standard signed math utilities missing in the Solidity language.
 */
library SignedMath {
    /**
     * @dev Returns the largest of two signed numbers.
     */
    function max(int256 a, int256 b) internal pure returns (int256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two signed numbers.
     */
    function min(int256 a, int256 b) internal pure returns (int256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two signed numbers without overflow.
     * The result is rounded towards zero.
     */
    function average(int256 a, int256 b) internal pure returns (int256) {
        // Formula from the book "Hacker's Delight"
        int256 x = (a & b) + ((a ^ b) >> 1);
        return x + (int256(uint256(x) >> 255) & (a ^ b));
    }

    /**
     * @dev Returns the absolute unsigned value of a signed value.
     */
    function abs(int256 n) internal pure returns (uint256) {
        unchecked {
            // must be unchecked in order to support `n = type(int256).min`
            return uint256(n >= 0 ? n : -n);
        }
    }
}

{
  "outputSelection": {
    "*": {
      "*": [
        "abi"
      ]
    }
  },
  "optimizer": {
    "enabled": true,
    "mode": "3"
  },
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "libraries": {},
  "enableEraVMExtensions": false,
  "forceEVMLA": false
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"address","name":"_signer","type":"address"},{"internalType":"address","name":"_admin","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[],"name":"InvalidShortString","type":"error"},{"inputs":[{"internalType":"string","name":"str","type":"string"}],"name":"StringTooLong","type":"error"},{"anonymous":false,"inputs":[],"name":"EIP712DomainChanged","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"inputs":[],"name":"SIGNATURE_TYPEHASH","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"_userAddress","type":"address"}],"name":"cancelNonce","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_signer","type":"address"}],"name":"changeSigner","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"domainSeparator","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"eip712Domain","outputs":[{"internalType":"bytes1","name":"fields","type":"bytes1"},{"internalType":"string","name":"name","type":"string"},{"internalType":"string","name":"version","type":"string"},{"internalType":"uint256","name":"chainId","type":"uint256"},{"internalType":"address","name":"verifyingContract","type":"address"},{"internalType":"bytes32","name":"salt","type":"bytes32"},{"internalType":"uint256[]","name":"extensions","type":"uint256[]"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"nonces","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes","name":"_context","type":"bytes"},{"components":[{"internalType":"uint256","name":"txType","type":"uint256"},{"internalType":"uint256","name":"from","type":"uint256"},{"internalType":"uint256","name":"to","type":"uint256"},{"internalType":"uint256","name":"gasLimit","type":"uint256"},{"internalType":"uint256","name":"gasPerPubdataByteLimit","type":"uint256"},{"internalType":"uint256","name":"maxFeePerGas","type":"uint256"},{"internalType":"uint256","name":"maxPriorityFeePerGas","type":"uint256"},{"internalType":"uint256","name":"paymaster","type":"uint256"},{"internalType":"uint256","name":"nonce","type":"uint256"},{"internalType":"uint256","name":"value","type":"uint256"},{"internalType":"uint256[4]","name":"reserved","type":"uint256[4]"},{"internalType":"bytes","name":"data","type":"bytes"},{"internalType":"bytes","name":"signature","type":"bytes"},{"internalType":"bytes32[]","name":"factoryDeps","type":"bytes32[]"},{"internalType":"bytes","name":"paymasterInput","type":"bytes"},{"internalType":"bytes","name":"reservedDynamic","type":"bytes"}],"internalType":"struct Transaction","name":"_transaction","type":"tuple"},{"internalType":"bytes32","name":"","type":"bytes32"},{"internalType":"bytes32","name":"","type":"bytes32"},{"internalType":"enum ExecutionResult","name":"_txResult","type":"uint8"},{"internalType":"uint256","name":"_maxRefundedGas","type":"uint256"}],"name":"postTransaction","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"signer","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"","type":"bytes32"},{"internalType":"bytes32","name":"","type":"bytes32"},{"components":[{"internalType":"uint256","name":"txType","type":"uint256"},{"internalType":"uint256","name":"from","type":"uint256"},{"internalType":"uint256","name":"to","type":"uint256"},{"internalType":"uint256","name":"gasLimit","type":"uint256"},{"internalType":"uint256","name":"gasPerPubdataByteLimit","type":"uint256"},{"internalType":"uint256","name":"maxFeePerGas","type":"uint256"},{"internalType":"uint256","name":"maxPriorityFeePerGas","type":"uint256"},{"internalType":"uint256","name":"paymaster","type":"uint256"},{"internalType":"uint256","name":"nonce","type":"uint256"},{"internalType":"uint256","name":"value","type":"uint256"},{"internalType":"uint256[4]","name":"reserved","type":"uint256[4]"},{"internalType":"bytes","name":"data","type":"bytes"},{"internalType":"bytes","name":"signature","type":"bytes"},{"internalType":"bytes32[]","name":"factoryDeps","type":"bytes32[]"},{"internalType":"bytes","name":"paymasterInput","type":"bytes"},{"internalType":"bytes","name":"reservedDynamic","type":"bytes"}],"internalType":"struct Transaction","name":"_transaction","type":"tuple"}],"name":"validateAndPayForPaymasterTransaction","outputs":[{"internalType":"bytes4","name":"magic","type":"bytes4"},{"internalType":"bytes","name":"context","type":"bytes"}],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"address","name":"_to","type":"address"}],"name":"withdraw","outputs":[],"stateMutability":"nonpayable","type":"function"},{"stateMutability":"payable","type":"receive"}]

d76fad23a3976fdae3844834893d9f299989c96a548fe621d4a8b867efc61c932b323de3010002532b69d3c0b69dc9166ddfa37b702f0e99cf663f223c803ea3eee7708c00000000000000000000000000000000000000000000000000000000000000600000000000000000000000000000000000000000000000000000000000000040000000000000000000000000e53dea2cae6fd81abf8185e11c2c6cff19229879000000000000000000000000ad6c857a7a9d2e956b068efce481cb54e80a394a

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

000000000000000000000000e53dea2cae6fd81abf8185e11c2c6cff19229879000000000000000000000000ad6c857a7a9d2e956b068efce481cb54e80a394a

-----Decoded View---------------
Arg [0] : _signer (address): 0xe53dEA2cae6Fd81ABF8185e11C2C6CfF19229879
Arg [1] : _admin (address): 0xad6C857A7a9D2e956B068EFCe481cB54e80a394A

-----Encoded View---------------
2 Constructor Arguments found :
Arg [0] : 000000000000000000000000e53dea2cae6fd81abf8185e11c2c6cff19229879
Arg [1] : 000000000000000000000000ad6c857a7a9d2e956b068efce481cb54e80a394a